faculty393044en

activity_title	startedAt	endedAt
Metallography Laboratory	(not set)	(not set)
a	(not set)	(not set)
Crystallography and laboratory	(not set)	(not set)
Metals in Medical Engineering	(not set)	(not set)
Non - Ferrous Alloys	(not set)	(not set)
Strengthening Mechanisms	(not set)	(not set)
Crystallography	(not set)	(not set)
Metallography and Microstructure Lab 1	(not set)	(not set)
Texture and Anisotropy	(not set)	(not set)
Material Science	(not set)	(not set)
Physical properties of Materials 1	(not set)	(not set)
Dislocation theory	(not set)	(not set)
Materials Selection	(not set)	(not set)
Speciul Subjects	(not set)	(not set)
Metallurgy	(not set)	(not set)
Nanomaterial	(not set)	(not set)

Papers in Journals

1. Hossein Agha mohamadi, Roohollah Jamaati, Valéria Mertinger, Erzsébet Nagy, Ali Amininejad،Enhancing strength-ductility synergy in AISI 430 alloy via combined pre-strain and partial annealing،Journal of Materials Research and Technology-JMR and T،2026.
2. Kimia Jamshidi, Roohollah Jamaati, Hamed Jamshidi Aval،Deformation-driven metallurgy of AZ91-Hydroxyapatite composites: Insights into microstructure and corrosion resistance،MATERIALS CHEMISTRY AND PHYSICS،2026.
3. Alireza Shaabani, Roohollah Jamaati, Seyed Jamal Hosseinipour،A new method for minimizing anisotropy in dual-phase steel،Archives of Civil and Mechanical Engineering،2026.
4. Ramezanali Farajollahi, Alexandre Maltais, Julie Levesque, Simeon Nachev, Roohollah Jamaati, Mousa Javidani،Deformation temperature-driven evolution of microstructure, interface, mechanical, and electrical properties in Al/Cu hybrid conductors: Revealing interfacial extruded Cu regions،JOURNAL OF ALLOYS AND COMPOUNDS،2026.
5. Morteza Abedi, Hamed Jamshidi Aval, Roohollah Jamaati،Investigation of Underwater Friction Stir Processing on Microstructure, Mechanical Properties, and Wear Resistance of Al-4.4Cu-1.5Mg Alloy Matrix Composite،JOM،2026.
6. Hossein Agha mohamadi, Roohollah Jamaati, Valéria Mertinger, D?niel Koncz و Horv?th, Ali Amininejad،Achieving high strength-ductility balance in ferritic stainless steel via thermomechanical processing of a bimodal microstructure،Journal of Materials Research and Technology-JMR and T،2026.
7. Fatemeh Talebi, Roohollah Jamaati, Seyed Jamal Hosseinipour،Superior synergy of strength and ductility in carbon steel by thermomechanical processing،Case Studies in Construction Materials،2025.
8. Fatemeh zahra Akbarzadeh, Mohammad Rajabi, Roohollah Jamaati, Annabel Braem،Microstructural tuning of AZ91 magnesium alloy for improved morphology and corrosion protection of electrodeposited hydroxyapatite coatings،CORROSION SCIENCE،2025.
9. Mohammad reza Noorian, Roohollah Jamaati, Sayed Mahmood Rabiee،High-performance AISI 316L by microstructure engineering،MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING،2025.
10. Hossein Agha mohamadi, Roohollah Jamaati،A new 1.1 GPa ultra-high strength ferritic stainless steel designed by synergistic strengthening of martensite and strain hardening،MATERIALS CHEMISTRY AND PHYSICS،2025.
11. Alireza Shaabani, Roohollah Jamaati, Seyed Jamal Hosseinipour،Designing a novel isotropic high-strength dual-phase steel،Journal of Materials Research and Technology-JMR and T،2025.
12. Hossein Agha mohamadi, Roohollah Jamaati،A novel rolling route to enhance strength-ductility balance in AISI 430 steel،MATERIALS CHEMISTRY AND PHYSICS،2025.
13. Alireza Ramzani Darvishi, Hamed Jamshidi Aval, Roohollah Jamaati،Influence of Al2O3 addition on microstructure, mechanical strength, and wear behavior of AA7075- Al2O3 matrix composites fabricated using deformation-driven metallurgy،Results in Engineering،2025.
14. Mahna Nikzad dinan, Roohollah Jamaati, Hamed Jamshidi Aval،Enhanced microstructure, strength, and wear resistance of AA2024-AlB2 composites via multi-pass friction stir processing،Journal of Materials Research and Technology-JMR and T،2025.
15. Mohammad reza Noorian, Roohollah Jamaati, Sayed Mahmood Rabiee،A new 1.2 GPa ultra-high strength AISI 316L steel designed by uniform microstructure and texture،MATERIALS CHEMISTRY AND PHYSICS،2025.
16. Alireza Shaabani, Roohollah Jamaati, Seyed Jamal Hosseinipour،Microstructure, texture, and mechanical anisotropy of dual-phase steel: Effect of intercritical annealing temperature،Journal of Science-Advanced Materials and Devices،2025.
17. Masoome Oliaei, Roohollah Jamaati, Hamed Jamshidi Aval،Enhancing microstructure, mechanical strength, and electrical conductivity in Cu-W composites through multi-pass friction stir processing and pre-strain techniques،Journal of Materials Research and Technology-JMR and T،2025.
18. Alireza Ramzani Darvishi, Hamed Jamshidi Aval, Roohollah Jamaati،Functionally gradient AA7075- Al2O3 composites fabrication via deformation-driven metallurgy process،Composites Part C: Open Access،2025.
19. Masoome Oliaei, Roohollah Jamaati, Hamed Jamshidi Aval،Optimizing microstructure and performance: The impact of pre-deformation and rotational speed on friction stir processed Cu-W composites،Journal of Advanced Joining Processes،2025.
20. Alireza Ramzani Darvishi, Hamed Jamshidi Aval, Roohollah Jamaati،Influence of tool rotational speed on microstructure, mechanical strength, and wear behavior of AA7075 matrix composites via deformation-driven metallurgy،Results in Physics،2025.
21. Seyed Reza Torabianfard, Roohollah Jamaati, Hamed Jamshidi Aval،Investigation of the influence of deposition time on morphology, crystallographic texture, and corrosion resistance of ZnO coatings on titanium substrates،SURFACE and COATINGS TECHNOLOGY،2025.
22. Seyed Reza Torabianfard, Roohollah Jamaati, Hamed Jamshidi Aval،Revealing the Morphology, Crystallographic Texture, and Corrosion Resistance of Electrodeposited ZnO Coatings on Pure Titanium Surfaces،JOM،2025.
23. Mohammadreza Roodgari, Roohollah Jamaati, Hamed Jamshidi Aval،Manufacturing of new dual phase steel with a combination of macro-laminated and micro-laminated morphology،CANADIAN METALLURGICAL QUARTERLY،2025.
24. Alireza Ramzani Darvishi, Hamed Jamshidi Aval, Roohollah Jamaati،Influence of Al2O3 Content on Microstucture, Mechanical Strength, and Wear Behavior of AA7075 Matrix Composites via Deformation-Driven Metallurgy،ADVANCED ENGINEERING MATERIALS،2025.
25. Masoud Rezaei, Sayed Mahmood Rabiee, Roohollah Jamaati, Shahrzad Rahmani،Surface modification of AISI 316 L stainless steel with polyvinyl alcohol/chitosan/sol-gel bioactive glass coating by electrospinning method،Applied Surface Science Advances،2025.
26. Masoome Oliaei, Roohollah Jamaati, Hamed Jamshidi Aval،Optimizing Microstructure and Performance of Friction Stir Processed Cu-W Composites: The Impact of Predeformation and Traverse Speed،ADVANCED ENGINEERING MATERIALS،2025.
27. Amirhossein Jahani, Hamed Jamshidi Aval, Mohammad Rajabi, Roohollah Jamaati, Annabel Braem،Hot wear resistance of Cu/Ti2SnC composite wire،INTERNATIONAL JOURNAL OF REFRACTORY METALS and HARD MATERIALS،2025.
28. Fatemeh Yaghoobi ashrafi, Roohollah Jamaati, Hamed Jamshidi Aval،Microstructure and strength analysis of dissimilar resistance welds between interstitial free (IF) steel and low carbon steel،Journal of Materials Research and Technology-JMR and T،2025.
29. Mahna Nikzad dinan, Roohollah Jamaati, Hamed Jamshidi Aval،Microstructural characteristics and mechanical behavior of in-situ synthesized AA2024- AlB2 composites produced via friction stir processing،Journal of Science-Advanced Materials and Devices،2025.
30. Zahra Sakhaei, Hamed Jamshidi Aval, Roohollah Jamaati،Microstructure, mechanical performance, electrical conductivity, and wear resistance of Cu-Fe composites processed via deformation-driven metallurgy،Journal of Materials Research and Technology-JMR and T،2025.
31. Mahna Nikzad dinan, Roohollah Jamaati, Hamed Jamshidi Aval،Underwater Friction Stir Fabrication and Performance Analysis of <scp>AA2024</scp> Composites Reinforced With In Situ <scp>AlB2</scp>،Engineering Reports،2025.
32. Boshra Ehsani amoli, Roohollah Jamaati, Hamed Jamshidi Aval, Ramezanali Farajollahi, Mousa Javidani،Enhanced strength-ductility synergy in AA5052 alloy through nano/ultrafine structure induced by asymmetric reverse rolling (ARR)،Journal of Materials Research and Technology-JMR and T،2025.
33. Alireza Shaabani, Roohollah Jamaati, Seyed Jamal Hosseinipour،Strong dependence of martensite morphology in low-carbon dual-phase steel on initial microstructure،MATERIALS and DESIGN،2025.
34. Hossein Agha mohamadi, Roohollah Jamaati, Valéria Mertinger, Erzsébet Nagy, Ali Amininejad،Effect of post-annealing temperature on the microstructure, texture, and mechanical properties of a deformed ferrite-martensite stainless steel،Journal of Materials Research and Technology-JMR and T،2025.
35. Hossein Agha mohamadi, Roohollah Jamaati،Enhancing Strength-Ductility Balance in Ferritic Stainless Steel via High-Temperature Annealing and Subsequent Rolling،JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE،2025.
36. Masoome Oliaei, Roohollah Jamaati, Hamed Jamshidi Aval،Friction stir processing of Cu-W composites: effects of pre-strain and traverse speed on microstructure and functional behavior،Welding in the World،2025.
37. Boshra Ehsani amoli, Roohollah Jamaati, Hamed Jamshidi Aval, Ramezanali Farajollahi, Mousa Javidani،Effect of asymmetric forward rolling (AFR) on the microstructure, texture, mechanical properties, and Portevin-Le Chatelier behavior of AA5052 alloy،Journal of Materials Research and Technology-JMR and T،2025.
38. Kimia Jamshidi, Roohollah Jamaati, Hamed Jamshidi Aval،Microstructure and corrosion resistance of AZ91- Hydroxyapatite composites processed via deformation-driven metallurgy،JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE،2025.
39. Zahra Sakhaei, Hamed Jamshidi Aval, Roohollah Jamaati،Microstructural Evolution, Performance, and Triboelectric Response of Cu-Fe Composites Processed via Deformation-Driven Metallurgy،Engineering Reports،2025.
40. Mahna Nikzad dinan, Roohollah Jamaati, Hamed Jamshidi Aval،Manufacturing AA2024-AlB2 in-situ composites: How the traverse speed during friction stir processing influences microstructure and mechanical characteristics،JOURNAL OF MATERIALS RESEARCH،2025.
41. Zahra Sakhaei, Hamed Jamshidi Aval, Roohollah Jamaati،Cu-Fe Composites Processed by Deformation-Driven Metallurgy: Correlating Structural, Mechanical, Electrical, and Tribological Properties،JOM،2025.
42. Roohollah Jamaati, Sabbah Ataya, Nashmi H. Alrasheedi, Adel Fathy،Effect of carbon content on the martensite morphology, texture, and mechanical properties of dual-phase steels،Journal of Materials Research and Technology-JMR and T،2025.
43. Alireza Shaabani, Roohollah Jamaati, Seyed Jamal Hosseinipour،Effect of asymmetric cross-rolling on the microstructure, texture, and mechanical anisotropy of Fe-0.07C steel،Archives of Civil and Mechanical Engineering،2025.
44. Hanieh Solouki, Roohollah Jamaati, Hamed Jamshidi Aval،Influence of asymmetric rolling paths on the microstructure, texture, mechanical behavior, and electrical conductivity of electrolytic tough-pitch copper،MATERIALS CHEMISTRY AND PHYSICS،2025.
45. Somayeh Gholamali por niazi, Roohollah Jamaati, Seyed Jamal Hosseinipour،A novel technique to produce trimodal microstructure in low-carbon steel،Materialia،2025.
46. Somayeh Gholamali por niazi, Roohollah Jamaati, Seyed Jamal Hosseinipour،The effect of high-temperature intercritical annealing and rolling strain on the development of trimodal microstructure in low-carbon steel،Journal of Materials Research and Technology-JMR and T،2025.
47. Somayeh Gholamali por niazi, Roohollah Jamaati, Seyed Jamal Hosseinipour،Synergistically achieving high strength and ductility in low-carbon steel sheet with bimodal microstructure،Results in Engineering،2025.
48. Alireza Shaabani, Roohollah Jamaati, Seyed Jamal Hosseinipour،Effect of thermomechanical processing on anisotropic behavior of low-carbon steel،Results in Engineering،2025.
49. Farnusheh Sharifian amiri, Seyed Jamal Hosseinipour, Hamed Jamshidi Aval, Roohollah Jamaati،Effect of thermo-mechanical age hardening on the strength and electrical conductivity of Copper-AA6063 bimetallic wire،Heliyon،2025.
50. Masoome Oliaei, Roohollah Jamaati, Hamed Jamshidi Aval،Impact of pre-deformation and heat input on the microstructure, mechanical properties, and electrical conductivity of friction stir processed Cu-W composites،JOURNAL OF ALLOYS AND COMPOUNDS،2025.
51. Amin Babapour Vajari, Seyed Jamal Hosseinipour, Roohollah Jamaati, Majid Abbasi،Modeling Coercivity in 1.2% Si Electrical Steel with Antimony Additions: A Response Surface Methodology Approach to Grain Size and Crystallographic Texture Effects،Metallography Microstructure and Analysis،2025.
52. Seyedeh marjan Bararpour hamzehkolai, Hamed Jamshidi Aval, Roohollah Jamaati, Javidani Mousa،Enhancing Al-16Si-4Cu Alloy Properties Through Heat Treatment and FMRR: A Comprehensive Study on Coating Microstructure and Wear Resistance،Metallography Microstructure and Analysis،2025.
53. Hossein Agha mohamadi, Roohollah Jamaati،Effect of cold single-roll drive rolling on the microstructural evolution and mechanical properties of ferritic stainless steel،Journal of Materials Research and Technology-JMR and T،2024.
54. Seyedeh marjan Bararpour hamzehkolai, Hamed Jamshidi Aval, Roohollah Jamaati, Mousa Javidani،Experimental Study and Thermo-Mechanical Simulation of Friction Surfacing Treated A390 Aluminum Alloy،METALS AND MATERIALS INTERNATIONAL،2024.
55. Seyedeh marjan Bararpour hamzehkolai, Hamed Jamshidi Aval, Roohollah Jamaati, Mousa Javidani،Post-processing ageing treatment of friction surfaced Al-16Si alloy: experimental and theoretical studies،MATERIALS SCIENCE AND TECHNOLOGY،2024.
56. Fahimeh Yazdani samani, Sayed Mahmood Rabiee, Roohollah Jamaati،Comparison of conventional and severe shot peening effects on the microstructure, texture, roughness, hardness, and electrochemical behavior of austenitic stainless steel،Heliyon،2024.
57. Ebrahim Tolouie charani, Roohollah Jamaati،Achieving Unusual Stable Textures in AZ91 Alloy by Asymmetric Hot Rolling،Metallography Microstructure and Analysis،2024.
58. Ebrahim Tolouie charani, Roohollah Jamaati،Effect of Initial ?0001?||RD Orientation on the Rolling Texture of AZ91 Alloy،Metallography Microstructure and Analysis،2024.
59. Fatemeh zahra Akbarzadeh, Mohammad Rajabi, Roohollah Jamaati, Annabel Braem،Effect of ?-Mg17Al12 phase on the surface interactions and morphology of hydroxyapatite coating deposited on AZ91 alloy،Surfaces and Interfaces،2024.
60. Mohammad Reza Borhani, Mohammad Rajabi, Reza Shoja Razavi, Roohollah Jamaati،Prediction of solidification structure in the laser metal deposition of IN625 superalloy using the numerical and experimental techniques،Materials Today Communications،2024.
61. Hanieh Solouki, Roohollah Jamaati, Hamed Jamshidi Aval،High-temperature annealing behavior of cold-rolled electrolytic tough-pitch copper،Heliyon،2024.
62. Alireza Shaabani, Roohollah Jamaati, Seyed Jamal Hosseinipour،Mechanical anisotropic behavior of low-carbon steel processed by asymmetric rolling،Heliyon،2024.
63. Alireza Shaabani, Roohollah Jamaati, Seyed Jamal Hosseinipour،Effect of strain path and short-term post-annealing on the microstructure, texture, and mechanical anisotropy of low-carbon steel،MATERIALS CHARACTERIZATION،2024.
64. Seyedeh marjan Bararpour hamzehkolai, Hamed Jamshidi Aval, Roohollah Jamaati, Mousa Javidani،Surface Property Enhancement of Al-Si-Cu Alloy Coating by Fast Multiple Rotation Rolling،ADVANCED ENGINEERING MATERIALS،2024.
65. Hanieh Solouki, Roohollah Jamaati, Hamed Jamshidi Aval،Low?Temperature Annealing of Asymmetrically Cold?Rolled Electrolytic Tough?Pitch Copper: Anneal Hardening and Bimodal Microstructure،ADVANCED ENGINEERING MATERIALS،2024.
66. Fatemeh Khorasani, Roohollah Jamaati, Hamed Jamshidi Aval،On the use of thermomechanical processing to enhance the strength-ductility-toughness balance of plain low-carbon steel،Heliyon،2024.
67. Seyedeh marjan Bararpour hamzehkolai, Hamed Jamshidi Aval, Roohollah Jamaati, Mousa Javidani،Processing of Al-Si-Cu alloy coating using fast multiple rotation rolling،Archives of Civil and Mechanical Engineering،2024.
68. Seyedeh marjan Bararpour hamzehkolai, Hamed Jamshidi Aval, Roohollah Jamaati, Mousa Javidani،Effect of fast multiple rotation rolling on friction surfaced Al Si Cu alloy،SURFACE and COATINGS TECHNOLOGY،2024.
69. Seyedeh marjan Bararpour hamzehkolai, Hamed Jamshidi Aval, Roohollah Jamaati, Mousa Javidani،Effect of heat treatment before fast multiple rotation rolling on friction surfaced Al-Si-Cu alloy،Journal of Materials Research and Technology-JMR and T،2024.
70. Amirhossein Jahani, Hamed Jamshidi Aval, Mohammad Rajabi, Roohollah Jamaati،Friction Stir Back Extrusion of Cu-5 vol.% Ti2SnC Composite،JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE،2024.
71. Somayeh Gholamali por niazi, Roohollah Jamaati, Seyed Jamal Hosseinipour،Achieving balanced mechanical properties in Fe-0.16C plain low-carbon steel by trimodal microstructure and fine cementite،Journal of Materials Research and Technology-JMR and T،2024.
72. Seyedeh marjan Bararpour hamzehkolai, Hamed Jamshidi Aval, Roohollah Jamaati, Mousa Javidani،Enhancing performance: Pre-processing heat treatment's influence on fast multiple rotation rolling of friction-surfaced Al-16Si-4Cu alloy،SURFACE and COATINGS TECHNOLOGY،2024.
73. Seyed Reza Torabianfard, Roohollah Jamaati, Hamed Jamshidi Aval،Characterization of Electrochemical and Biocompatibility of Zinc Oxide Coating Electrodeposited on Commercial Pure Titanium Alloy،ADVANCED ENGINEERING MATERIALS،2024.
74. Somayeh Gholamali por niazi, Roohollah Jamaati, Seyed Jamal Hosseinipour،Unprecedented high strength and ductility in plain low-carbon steel via trimodal grain size distribution،Journal of Materials Research and Technology-JMR and T،2024.
75. Farima Haghdadi, Roohollah Jamaati, Seyed Jamal Hosseinipour،Achieving high strength in AA2024 alloy by natural aging and asymmetric cold rolling،Results in Engineering،2024.
76. Seyedeh marjan Bararpour hamzehkolai, Hamed Jamshidi Aval, Roohollah Jamaati, Mousa Javidani،Friction surfacing of hypereutectic Al-Si alloy on commercially pure aluminum: Effect of consumable rod heat treatment and heat input،Journal of Central South University،2024.
77. Amirhossein Jahani, Hamed Jamshidi Aval, Mohammad Rajabi, Roohollah Jamaati،Microstructure, mechanical, electrical and wear properties of friction stir back extruded copper-6 vol.%Ti2SnC composite material،CANADIAN METALLURGICAL QUARTERLY،2024.
78. Hanieh Solouki, Roohollah Jamaati, Hamed Jamshidi Aval،Comparison of a copper processed by asymmetric unidirectional rolling (AUR) and cross rolling (ACR): Strain distribution, microstructure, texture, and mechanical properties،MATERIALS CHEMISTRY AND PHYSICS،2024.
79. Farnusheh Sharifian amiri, Seyed Jamal Hosseinipour, Hamed Jamshidi Aval, Roohollah Jamaati،Evaluation of strength and electrical conductivity of copper clad-AA6063 bimetallic composite wire after annealing treatment،MATERIALS CHEMISTRY AND PHYSICS،2024.
80. Seyedeh marjan Bararpour hamzehkolai, Hamed Jamshidi Aval, Roohollah Jamaati, Mousa Javidani،Effect of preprocessing heat treatment of the Al-16Si-4Cu alloy on microstructure and tribological behavior of friction-surfaced coating،Applied Surface Science Advances،2024.
81. Fatemeh Talebi, Roohollah Jamaati, Seyed Jamal Hosseinipour،Strong strain-hardening capability in plain carbon steel through cold rolling and heat treatment of lamellar structure،Archives of Civil and Mechanical Engineering،2024.
82. Seyedeh marjan Bararpour hamzehkolai, Hamed Jamshidi Aval, Roohollah Jamaati, Mousa Javidani،Effect of initial heat treatment of A390 alloy on microstructure and tribological behavior of friction surfaced coating،SURFACE and COATINGS TECHNOLOGY،2024.
83. Houra Mazaheri tehrani, Hamed Jamshidi Aval, Roohollah Jamaati،Reverse effects of pre-deformation and traverse speed on the mechanical properties of friction stir processed pure copper،Engineering Research Express،2024.
84. Seyedeh marjan Bararpour hamzehkolai, Hamed Jamshidi Aval, Roohollah Jamaati, Mousa Javidani،Investigation of the effect of traverse speed in friction surfacing of Al-16Si alloy by smoothed-particle hydrodynamics (SPH) simulation and experimental study،Computational Particle Mechanics،2024.
85. Farima Haghdadi, Roohollah Jamaati, Seyed Jamal Hosseinipour،Evading the strength-ductility trade-off dilemma in AA2024 alloy by short-term natural re-aging after T351 temper،Heliyon،2024.
86. Ebrahim Tolouie charani, Roohollah Jamaati،Significant Texture Weakening of AZ91 Alloy by Asymmetric Hot Rolling،Metallography Microstructure and Analysis،2024.
87. Amirhossein Jahani, Hamed Jamshidi Aval, Mohammad Rajabi, Roohollah Jamaati،Effect of extrusion speed on properties of Cu?5vol.%Ti2SnC composite wire fabricated by friction stir back extrusion process،TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA،2024.
88. Farnusheh Sharifian amiri, Seyed Jamal Hosseinipour, Hamed Jamshidi Aval, Roohollah Jamaati،Fabrication of a novel high-strength and high-conductivity copper-clad aluminum composite wire،CIRP Journal of Manufacturing Science and Technology،2023.
89. Iman Harasani, Roohollah Jamaati, Hamed Jamshidi Aval،Fabrication Commercial Pure Titanium-304 Stainless Steel Bimetal with Impressive Mechanical Properties،ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING،2023.
90. Amirhossein Jahani, Hamed Jamshidi Aval, Mohammad Rajabi, Roohollah Jamaati،Effects of Ti2SnC MAX phase reinforcement content on the properties of copper matrix composite produced by friction stir back extrusion process،MATERIALS CHEMISTRY AND PHYSICS،2023.
91. Fatemeh Khorasani, Roohollah Jamaati, Hamed Jamshidi Aval،On the significance of intercritical annealing time in governing mechanical properties of lean composition dual-phase steel،Archives of Civil and Mechanical Engineering،2023.
92. Amirhossein Jahani, Hamed Jamshidi Aval, Mohammad Rajabi, Roohollah Jamaati،Fabrication of impressive electrically conductive Cu-Ti2SnC composite wires through the friction stir back extrusion process،Journal of the Brazilian Society of Mechanical Sciences and Engineering،2023.
93. Mohammad Reza Borhani, Mohammad Rajabi, Reza Shojarazavi, Roohollah Jamaati،Statistical modeling in the laser cladding process of Inconel 625 via linear regression and response surface method،JOURNAL OF LASER APPLICATIONS،2023.
94. Fatemeh Khorasani, Roohollah Jamaati, Hamed Jamshidi Aval،Extraordinary toughness in AISI 1008 steel via controlling intercritical annealing time،Journal of Manufacturing Processes،2023.
95. Fahimeh Yazdani samani, Sayed Mahmood Rabiee, Roohollah Jamaati, Sara Bagherifard،Effect of shot peening on electrophoretic deposition of bioactive glass coating on AISI 316L stainless steel،CERAMICS INTERNATIONAL،2023.
96. HOURA MAZAHERI TEHRANI, Hamed Jamshidi Aval, Roohollah Jamaati،Manufacturing of Ultrafine-Grained Copper via Rolling and Cooling-Assisted Friction Stir Processing: Effect of Traverse Speed،JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE،2023.
97. Amirhossein Jahani, Hamed Jamshidi Aval, Mohammad Rajabi, Roohollah Jamaati،Effects of primary sintering on microstructure and properties of friction stir back extruded Cu-Ti2SnC wire composite،Archives of Civil and Mechanical Engineering،2023.
98. Amirhossein Jahani, Hamed Jamshidi Aval, Mohammad Rajabi, Roohollah Jamaati،Effects of Ti 2 SnC MAX Phase on Microstructure, Mechanical, Electrical, and Wear Properties of Stir?Extruded Copper Matrix Composite،ADVANCED ENGINEERING MATERIALS،2023.
99. Amin Babapour Vajari, Seyed Jamal Hosseinipour, Roohollah Jamaati, Majid Abbasi،Effect of Sb and Initial Annealing on the Microstructure, Texture, and Magnetic Behavior of Low Silicon Steel Produced by Single-Roll Drive Rolling،METALS AND MATERIALS INTERNATIONAL،2023.
100. Fahimeh Yazdani samani, Sayed Mahmood Rabiee, Roohollah Jamaati, Sara Bagherifard،The synergistic effect of texture and surface roughness on electrophoretic deposited bioactive glass coating،JOURNAL OF THE AMERICAN CERAMIC SOCIETY،2023.
101. HOURA MAZAHERI TEHRANI, Hamed Jamshidi Aval, Roohollah Jamaati،Enhancement of the Strength-Ductility Balance in Cu-40 Pct Zn Alloy by Single Roll Drive Rolling and Cooling-Assisted Friction Stir Processing،METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE،2023.
102. Fatemeh Goli, Roohollah Jamaati،Significant Texture Weakening of Al-Cu-Mg Alloy by Low Strain Asymmetric Cross Rolling Process،JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE،2023.
103. Hamid Ghorbani nanekaran, Roohollah Jamaati،Simultaneous improvement of strength and toughness in Al-Zn-Mg-Cu/pure Al laminated composite via heterogeneous microstructure،MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING،2023.
104. Seyedeh marjan Bararpour hamzehkolai, Hamed Jamshidi Aval, Roohollah Jamaati, Mousa Javidani،Experimental and numerical investigation of Al 16Si alloy friction surfacing on AA1050 aluminum substrate: Effect of axial feeding rate،SURFACE and COATINGS TECHNOLOGY،2023.
105. Seyedeh marjan Bararpour hamzehkolai, Hamed Jamshidi Aval, Roohollah Jamaati،Combined experimental-numerical analysis of A356 aluminum alloy friction surfacing on AA2024 aluminum alloy substrate،Journal of Materials Research and Technology-JMR and T،2023.
106. Fatemeh Khorasani, Roohollah Jamaati, Hamed Jamshidi Aval،Extraordinary strength-ductility-toughness in Fe-0.08C plain low-carbon steel via introducing weblike martensite: Towards the third generation،MATERIALS CHEMISTRY AND PHYSICS،2023.
107. Amirhossein Jahani, Hamed Jamshidi Aval, Mohammad Rajabi, Roohollah Jamaati،Microstructures and properties of copper matrix composite wires reinforced with Ti2SnC particles،MATERIALS SCIENCE AND TECHNOLOGY،2023.
108. Hamid Ghorbani nanekaran, Roohollah Jamaati،Effect of compression bonding temperature on the strength-ductility balance of AA7075 alloy،Journal of Materials Research and Technology-JMR and T،2023.
109. Mehdi Zarei, Salman Nourouzi, Roohollah Jamaati, Irene Garcia Cano, Maria Sarret, Sergi Dosta, S.H. Esmaeili و Faraj،Electrochemical properties of CNT doped nanoporous tin oxide hybrid electrode formed on cold spray tin coating for supercapacitor application،DIAMOND AND RELATED MATERIALS،2023.
110. Iman Harasani, Roohollah Jamaati, Hamed Jamshidi Aval،Electrochemical aspects and in vitro biocompatibility of Ti-SS304 layered composite،Journal of Materials Research and Technology-JMR and T،2023.
111. Seyedeh marjan Bararpour hamzehkolai, Hamed Jamshidi Aval, Roohollah Jamaati, Mousa Javidani،Comparison of finite element and smoothed-particle hydrodynamics models in the simulation of hypereutectic Al-Si alloy friction surfacing: calibrations from experiments،Archives of Civil and Mechanical Engineering،2023.
112. Fatemeh Khorasani, Roohollah Jamaati, Hamed Jamshidi Aval،Effect of Intercritical Annealing Time on the Microstructure and Mechanical Properties of Dual?Phase Steel Processed by Large?Strain Asymmetric Cold?Rolling،STEEL RESEARCH INTERNATIONAL،2023.
113. Mohammad Reza Borhani, Mohammad Rajabi, Reza Shoja Razavi, Roohollah Jamaati،Investigating the relationship between mechanical properties and residual stress in the laser cladding process of Inconel 625 superalloy،Heliyon،2023.
114. Amin Babapour Vajari, Seyed Jamal Hosseinipour, Roohollah Jamaati, Majid Abbasi،Effects of Asymmetric Cross-Rolling and Initial Annealing on the Microstructure, Crystallographic Texture, and Magnetic Behavior of Silicon Steel with Different Amounts of Antimony،JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE،2023.
115. Fatemeh Khorasani, Roohollah Jamaati, Hamed Jamshidi Aval،A low-cost strategy to improve strength-ductility-toughness balance in a low-carbon steel،IRONMAKING and STEELMAKING،2023.
116. Ebrahim Tolouie charani, Roohollah Jamaati،Effect of rolling reduction on the microstructure, texture, and mechanical behavior of AZ91 alloy،Journal of Materials Research and Technology-JMR and T،2023.
117. Hamid Ghorbani nanekaran, Roohollah Jamaati،Breakthrough the strength-ductility trade-off in AA7075 alloy by gradient microstructure،Archives of Civil and Mechanical Engineering،2023.
118. Ramezanali Farajollahiseresty, Hamed Jamshidi Aval, Roohollah Jamaati, Mousa Javidani،Effect of Ni on Aging Behavior of Al-Cu-Mg Alloy Cladding،JOM،2023.
119. Fatemeh Talebi, Roohollah Jamaati, Seyed Jamal Hosseinipour،A low-cost strategy to enhance strength-ductility balance in AISI1045 steel،Journal of Materials Research and Technology-JMR and T،2023.
120. Hossein Aghamohammadi, Sayed Mahmood Rabiee, Seyed Jamal Hosseinipour, Roohollah Jamaati،Effect of microstructure and texture of AZ31 magnesium alloy substrate on nucleation and growth of biomimetic calcium phosphate coating،Journal of Materials Research and Technology-JMR and T،2023.
121. Amin Babapour Vajari, Seyed Jamal Hosseinipour, Roohollah Jamaati, Majid Abbasi،The effects of antimony and hot rolling on the microstructure, texture, and magnetic properties of a non-oriented electrical steel،Journal of Materials Research and Technology-JMR and T،2023.
122. Mohabbat Amirnejad, Mohammad Rajabi, Roohollah Jamaati،Modeling of Ca/P and deposit size responses of electrodeposited calcium-phosphate coating using full factorial design،ENGINEERING COMPUTATIONS،2023.
123. Ebrahim Tolouie charani, Roohollah Jamaati،Effect of ?-Mg17Al12 Phase on Microstructure, Crystallographic Texture, and Mechanical Behavior of Mg-9Al-1Zn Alloy Processed by Asymmetric Cold Rolling،Metallography Microstructure and Analysis،2023.
124. Seyed amir Kazemi navaei, Roohollah Jamaati, Hamed Jamshidi Aval،Effect of single roll drive rolling on microstructure, texture, and mechanical property anisotropy of Al?5.6Zn?2.5Mg?1.4Cu aluminum alloy،TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA،2023.
125. Ramezanali Farajollahiseresty, Hamed Jamshidi Aval, Roohollah Jamaati, Mousa Javidani،Non-isothermal aging behavior of a friction-surfaced Al-Cu-Mg alloy matrix composite coating reinforced by nickel-aluminide،Journal of Central South University،2023.
126. Mohammadreza Roodgari, Roohollah Jamaati،A technique to achieve an excellent strength-ductility balance in AA2024 alloy،Archives of Civil and Mechanical Engineering،2023.
127. Fatemeh Khorasani, Roohollah Jamaati, Hamed Jamshidi Aval،Tuning strength-ductility combination of AISI 1008 steel through large strain single-roll drive rolling and intercritical annealing،MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING،2023.
128. Ramezanali Farajollahiseresty, Hamed Jamshidi Aval, Roohollah Jamaati،Development and Characterization of in-situ AA2024-Al3NiCu Composites،International Journal of Metalcasting،2023.
129. Mehdi Zarei, Salman Nourouzi, Roohollah Jamaati, S.H. Esmaeili و Faraj, Irene Garcia Cano, Sergi Dosta, Maria Sarret،Electrochemical characterization of nanoporous SnO2 formed by anodization on cold spray tin coating for supercapacitor application،JOURNAL OF ELECTROANALYTICAL CHEMISTRY،2023.
130. Mohabbat Amirnejad, Mohammad Rajabi, Roohollah Jamaati،Importance of Individual Evaluation of Crystallographic Texture and Microstructure Effects on Biocompatibility and Corrosion Performance of Ti6Al4V Alloy،METALS AND MATERIALS INTERNATIONAL،2023.
131. Mehdi Solayman Pour Sadati, Hamed Jamshidi Aval, Roohollah Jamaati،Manufacturing of high-toughness Al\u2013Si alloy by rolling and friction stir processing: Effect of traverse speed،CIRP Journal of Manufacturing Science and Technology،2022.
132. Ramezanali Farajollahiseresty, Hamed Jamshidi Aval, Roohollah Jamaati،Evaluating of the microstructure, texture, and mechanical properties of AA2024-Al3NiCu composites fabricated by the stir casting process،CIRP Journal of Manufacturing Science and Technology،2022.
133. Fatemeh Yaghoobi ashrafi, Roohollah Jamaati, Hamed Jamshidi Aval،Resistance spot welding of high-strength DP steel and nano/ultrafine-grained IF steel sheets،MATERIALS CHEMISTRY AND PHYSICS،2022.
134. Ramezanali Farajollahiseresty, Hamed Jamshidi Aval, Roohollah Jamaati،Effect of friction surfacing parameters on the microstructural, mechanical properties, and wear characteristic of Al-Cu-Mg alloy coating reinforced by nickel aluminide،Archives of Civil and Mechanical Engineering،2022.
135. Ramezanali Farajollahiseresty, Hamed Jamshidi Aval, Roohollah Jamaati, Zuzana Hajovska, Stefan Nagy،Effects of pre- and post-friction surfacing heat treatment on microstructure and corrosion behavior of nickel-aluminide reinforced Al-Cu-Mg alloy،JOURNAL OF ALLOYS AND COMPOUNDS،2022.
136. Amin Babapour Vajari, Seyed Jamal Hosseinipour, Roohollah Jamaati, Majid Abbasi،Effect of antimony addition and asymmetric cold rolling on the texture and magnetic properties of a 1.2% Si steel،JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS،2022.
137. Mahla Afifeh, Seyed Jamal Hosseinipour, Roohollah Jamaati،Manufacturing of pure copper with extraordinary strength-ductility-conductivity balance by cryorolling and annealing،CIRP Journal of Manufacturing Science and Technology،2022.
138. Zahra Rahmati dehkordi, Hamed Jamshidi Aval, Salman Nourouzi, Roohollah Jamaati،Effect of copper reinforcement on the microstructure, macrotexture, and wear properties of a friction-surfaced Al-Cu-Mg coating،SURFACE and COATINGS TECHNOLOGY،2022.
139. Masoome Oliaei, Roohollah Jamaati،Improvement of the strength-ductility-toughness balance in interstitial-free steel by gradient microstructure،MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING،2022.
140. Mohabbat Amirnejad, Mohammad Rajabi, Roohollah Jamaati،Electrodeposition of Hydroxyapatite Coating on Ti6Al4V Alloy: Mechanistic Investigation of the Substrate Crystallographic Texture Effect،JOURNAL OF THE ELECTROCHEMICAL SOCIETY،2022.
141. Iman Harasani, Roohollah Jamaati, Hamed Jamshidi Aval،Friction stir cladding of commercially pure titanium on 304 stainless steel،Welding in the World،2022.
142. Ramezanali Farajollahiseresty, Hamed Jamshidi Aval, Roohollah Jamaati،Non-isothermal aging behavior of in-situ AA2024?Al3NiCu composite،TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA،2022.
143. Ali Amininejad, Roohollah Jamaati, Seyed Jamal Hosseinipour،Microstructure-mechanical properties evaluation of AISI 304 steel during back-annealing،CANADIAN METALLURGICAL QUARTERLY،2022.
144. Zahra Rahmati dehkordi, Hamed Jamshidi Aval, Salman Nourouzi, Roohollah Jamaati،An investigation on AA2024-15 wt%Cu composite cladded on AA1050 with superb mechanical and tribological properties،CIRP Journal of Manufacturing Science and Technology،2022.
145. Mohammadreza Roodgari, Roohollah Jamaati،Ultrahigh-temperature aging response of asymmetrically cold-rolled AA2024 alloy،CIRP Journal of Manufacturing Science and Technology،2022.
146. FOROZAN YOUSEFPOUR, Roohollah Jamaati, Hamed Jamshidi Aval،Investigation of microstructure, crystallographic texture, and mechanical behavior of magnesium-based nanocomposite fabricated via multi-pass FSP for biomedical applications،Journal of the Mechanical Behavior of Biomedical Materials،2022.
147. FOROZAN YOUSEFPOUR, Roohollah Jamaati, Hamed Jamshidi Aval،Synergistic effects of hybrid (HA+Ag) particles and friction stir processing in the design of a high-strength magnesium matrix bio-nano composite with an appropriate texture for biomedical applications،Journal of the Mechanical Behavior of Biomedical Materials،2022.
148. Mehdi Solayman Pour Sadati, Hamed Jamshidi Aval, Roohollah Jamaati،Achieving high strength and superior ductility in Al-Si alloy by cold rolling and friction stir processing،JOURNAL OF ALLOYS AND COMPOUNDS،2022.
149. Ramezanali Farajollahiseresty, Hamed Jamshidi Aval, Roohollah Jamaati،Effect of friction surfacing on the microstructural and wear characteristics of Al-Cu-Mg alloy coating reinforced by nickel aluminide،INTERMETALLICS،2022.
150. Seyed amir Kazemi navaei, Roohollah Jamaati, Hamed Jamshidi Aval،Effect of single roll drive cross rolling on the microstructure, crystallographic texture, and mechanical behavior of Al\u2013Zn\u2013Mg\u2013Cu alloy،Archives of Civil and Mechanical Engineering،2022.
151. Ali Asghar Zolfaghari Darzi, Hamid Gorji, Mohammad Bakhshi و jooybari, Roohollah Jamaati،Microstructure, mechanical, and electrical properties of the pure copper tubes processed by hydro-assisted tube pressing (HATP) as a new severe plastic deformation method،INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY،2022.
152. Esmaeil Damavandi, Salman Nourouzi, Sayed Mahmood Rabiee, Roohollah Jamaati, Jerzy A. Szpunar،EBSD study of the microstructure and texture evolution in an Al-Si-Cu alloy processed by route A ECAP،JOURNAL OF ALLOYS AND COMPOUNDS،2021.
153. Zahra Rahmati dehkordi, Hamed Jamshidi Aval, Salman Nourouzi, Roohollah Jamaati،Effects of Pre-Heat Treatment of the Consumable Rod on the Microstructural and Mechanical Properties of the Friction Surfaced Al-Cu-Mg Alloy over Pure Aluminum،SURFACE and COATINGS TECHNOLOGY،2021.
154. Mehdi Zarei, Salman Nourouzi, Roohollah Jamaati, Irene Garcia Cano, Sergi Dosta, Maria Sarret،Formation of highly uniform tin oxide nanochannels by electrochemical anodization on cold sprayed tin coatings،SURFACE and COATINGS TECHNOLOGY،2021.
155. Hossein Hassanpour shirsavar, Roohollah Jamaati, Seyed Jamal Hosseinipour،Effect of gradient microstructure on the mechanical properties of aluminum alloy،MATERIALS CHARACTERIZATION،2021.
156. Mehdi Zarei, Salman Nourouzi, Roohollah Jamaati, Irene Garcia Cano, Sergi Dosta, Maria Sarret،Water-assisted crystallization of nanoporous tin oxide formed by anodic oxidation on cold sprayed tin coating،JOURNAL OF ALLOYS AND COMPOUNDS،2021.
157. Houra Mazaheri tehrani, Hamed Jamshidi Aval, Roohollah Jamaati،Achieving high strength-ductility in pure copper by cold rolling and submerged friction stir processing (SFSP)،Journal of Manufacturing Processes،2021.
158. Hanieh Azimi, Salman Nourouzi, Roohollah Jamaati،Effects of Ti particles and T6 heat treatment on the microstructure and mechanical properties of A356 alloy fabricated by compocasting،MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING،2021.
159. Zahra Rahmati dehkordi, Hamed Jamshidi Aval, Salman Nourouzi, Roohollah Jamaati،Effect of mechtrode rotational speed on friction surfacing of AA2024 on AA1050 substrate،CIRP Journal of Manufacturing Science and Technology،2021.
160. Zahra Rahmati dehkordi, Hamed Jamshidi Aval, Salman Nourouzi, Roohollah Jamaati،Effect of friction surfacing parameters on microstructure and mechanical properties of solid-solutionized AA2024 aluminium alloy cladded on AA1050،MATERIALS CHEMISTRY AND PHYSICS،2021.
161. Mohabbat Amirnejad, Mohammad Rajabi, Roohollah Jamaati،In Vitro Corrosion Anisotropy Assessment of Ti6Al4V Bimodal Microstructure due to Crystallographic Texture،METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE،2021.
162. FOROZAN YOUSEFPOUR, Roohollah Jamaati, Hamed Jamshidi Aval،Effect of traverse and rotational speeds on microstructure, texture, and mechanical properties of friction stir processed AZ91 alloy،MATERIALS CHARACTERIZATION،2021.
163. Esmaeil Damavandi, Salman Nourouzi, Roohollah Jamaati, Sayed Mahmood Rabiee, Jerzy A. Szpunar،Influence of Thermomechanical Processing on the Microstructure and Tensile Behavior of Solution-Treated Al-18%Si-4.5%Cu Alloy،JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE،2021.
164. Ali Amininejad, Roohollah Jamaati, Seyed Jamal Hosseinipour،Influence of Deformation and Post-Annealing Treatment on the Microstructure and Mechanical Properties of Austenitic Stainless Steel،TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS،2021.
165. Seyed amir Kazemi navaei, Roohollah Jamaati, Hamed Jamshidi Aval،Asymmetric cold rolling of AA7075 alloy: The evolution of microstructure, crystallographic texture, and mechanical properties،MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING،2021.
166. Esmaeil Damavandi, Salman Nourouzi, Sayed Mahmood Rabiee, Roohollah Jamaati, Jerzy A. Szpunar،Textural Evaluation of Al-Si-Cu Alloy Processed by Route BC-ECAP،METALS AND MATERIALS INTERNATIONAL،2021.
167. Hossein Aghamohammadi, Seyed Jamal Hosseinipour, Sayed Mahmood Rabiee, Roohollah Jamaati،Effect of hot rolling on microstructure, crystallographic texture, and hardness of AZ31 alloy،MATERIALS CHEMISTRY AND PHYSICS،2021.
168. Houra Mazaheri tehrani, Hamed Jamshidi Aval, Roohollah Jamaati،Pre-strain assisted low heat-input friction stir processing to achieve ultrafine-grained copper،MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING،2021.
169. Ramezanali Farajollahiseresty, Hamed Jamshidi Aval, Roohollah Jamaati،Effects of Ni on the microstructure, mechanical and tribological properties of AA2024-Al3NiCu composite fabricated by stir casting process،JOURNAL OF ALLOYS AND COMPOUNDS،2021.
170. Abolghasem Darmiani, Salman Nourouzi, Roohollah Jamaati،Manufacturing of gradient Al/SiC composite wire by friction stir back extrusion،CIRP Journal of Manufacturing Science and Technology،2021.
171. , Seyed Jamal Hosseinipour, Roohollah Jamaati،Effect of Temperature and Strain on the Microstructure and Mechanical Properties of AA6061/AZ31 Laminated Composite Produced by Hot Forge Bonding،TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS،2021.
172. Behzad Akbarzadeh, Hamid Gorji, Mohammad Bakhshi و jooybari, Roohollah Jamaati, Mohammad Javad Mirnia،Investigation of mechanical and microstructural properties of pure copper processed by combined extrusion-equal channel angular pressing (C-Ex-ECAP)،INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY،2021.
173. Esmaeil Damavandi, Salman Nourouzi, Sayed Mahmood Rabiee, Roohollah Jamaati, Jerzy A. Szpunar،Effect of route BC-ECAP on microstructural evolution and mechanical properties of Al-Si-Cu alloy،JOURNAL OF MATERIALS SCIENCE،2021.
174. Mahla Afifeh, Seyed Jamal Hosseinipour, Roohollah Jamaati،Effect of post-annealing on the microstructure and mechanical properties of nanostructured copper،MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING،2021.
175. Fatemeh Yaghoobi ashrafi, Roohollah Jamaati, Hamed Jamshidi Aval،Simultaneous enhancement of strength and ductility in ferrite-martensite steel via increasing the martensite fraction،MATERIALS CHEMISTRY AND PHYSICS،2021.
176. Mohammadreza Roodgari, Roohollah Jamaati, Hamed Jamshidi Aval،A new method to produce dual-phase steel،MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING،2021.
177. Seyede marjan Bararpour hamzekolaei, Hamed Jamshidi Aval, Roohollah Jamaati،Cellular automaton modeling of dynamic recrystallization in Al-Mg alloy coating fabricated using the friction surfacing process،SURFACE and COATINGS TECHNOLOGY،2021.
178. Mohabbat Amirnejad, Mohammad Rajabi, Roohollah Jamaati،The effect of crystallographic texture as a distinct effective parameter on the biocorrosion performance of Ti6Al4V alloy in PBS solution،CORROSION SCIENCE،2021.
179. Nafiseh Mohammadtabar, Mohammad Bakhshi و jooybari, Hamid Gorji, Roohollah Jamaati, Jerzy A. Szpunar،Effect of electric current pulse type on springback, microstructure, texture, and mechanical properties during V-bending of AA2024 aluminum alloy،JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME،2021.
180. Esmaeil Damavandi, Salman Nourouzi, Sayed Mahmood Rabiee, Roohollah Jamaati, Jerzy A. Szpunar،Effect of Route BC Equal-Channel Angular Pressing on the Microstructure, Microtexture, and Homogeneity of Al-18%Si-4.5%Cu Alloy،JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE،2021.
181. Fatemeh Yaghoobi ashrafi, Roohollah Jamaati, Hamed Jamshidi Aval،A new 1.2 GPa-strength plain low carbon steel with high ductility obtained by SRDR of martensite and intercritical annealing،MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING،2020.
182. Zahra Rahmati dehkordi, Hamed Jamshidi Aval, Salman Nourouzi, Roohollah Jamaati،Microstructural, tribological, and texture analysis of friction surfaced Al-Mg-Cu clad on AA1050 alloy،SURFACE and COATINGS TECHNOLOGY،2020.
183. Esmaeil Damavandi, Salman Nourouzi, Sayed Mahmood Rabiee, Roohollah Jamaati, Ahmed A. Tiamiyu, Jerzy A. Szpunar،Effects of prior ECAP process on the dynamic impact behaviors of hypereutectic Al-Si alloy،MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING،2020.
184. Hossein Aghamohammadi, Seyed Jamal Hosseinipour, Sayed Mahmood Rabiee, Roohollah Jamaati،Influence of Crystallographic Texture on the Corrosion Product Morphology and Corrosion Rate of AZ31 Plate in Simulated Body Fluid،JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE،2020.
185. Ali Amininejad, Roohollah Jamaati, Seyed Jamal Hosseinipour،Improvement of strength-ductility balance of SAE 304 stainless steel by asymmetric cross rolling،MATERIALS CHEMISTRY AND PHYSICS،2020.
186. Mohabbat Amirnejad, Mohammad Rajabi, Roohollah Jamaati،Comparative investigation of microstructure and crystallographic texture effect on Ti6Al4V alloy mechanical properties،MATERIALS CHEMISTRY AND PHYSICS،2020.
187. Mohammadreza Roodgari, Roohollah Jamaati, Hamed Jamshidi Aval،Microstructure and mechanical properties of IF/St52 steel composite produced by friction stir lap welding،MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING،2020.
188. Seyede marjan Bararpour hamzekolaei, Hamed Jamshidi Aval, Roohollah Jamaati،Effects of Zn powder on alloying during friction surfacing of Al-Mg alloy،JOURNAL OF ALLOYS AND COMPOUNDS،2020.
189. Seyede marjan Bararpour hamzekolaei, Hamed Jamshidi Aval, Roohollah Jamaati،Effect of non-isothermal aging on microstructure and mechanical properties of friction surfaced AA5083-15wt%Zn composites،SURFACE and COATINGS TECHNOLOGY،2020.
190. Mohammadreza Roodgari, Roohollah Jamaati, Hamed Jamshidi Aval،Fabrication of a 2-layer laminated steel composite by friction stir additive manufacturing،Journal of Manufacturing Processes،2020.
191. Seyede marjan Bararpour hamzekolaei, Hamed Jamshidi Aval, Roohollah Jamaati،An experimental and theoretical investigation of thermo-mechanical issues in friction surfacing of Al-Mg aluminium alloys: material flow and residual stress،MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING،2020.
192. Hossein Hassanpour shirsavar, Roohollah Jamaati, Seyed Jamal Hosseinipour،A novel technique to form gradient microstructure in AA5052 alloy،MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING،2020.
193. Mahla Afifeh, Seyed Jamal Hosseinipour, Roohollah Jamaati،High-strength and high-conductivity nanograined copper fabricated by partial homogenization and asymmetric rolling،MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING،2019.
194. Abolghasem Darmiani, Salman Nourouzi, Roohollah Jamaati،FSBE process: A technique for fabrication of aluminum wire with randomly oriented fine grains،MATERIALS LETTERS،2019.
195. Mohammad mahdi Moradi, Hamed Jamshidi Aval, Roohollah Jamaati،Effect of tool pin geometry and weld pass number on microstructural, natural aging and mechanical behaviour of SiC-incorporated dissimilar friction-stir-welded aluminium alloys،SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES،2019.
196. Ebrahim Tolouie charani, Roohollah Jamaati،Effect of asymmetric cold rolling on the microstructure, texture, and mechanical properties of the AZ91 alloy،Materials Research Express،2019.
197. Roohollah Jamaati،Four unusual texture transitions in high purity copper during cold deformation followed by quenching،Materials Research Express،2019.
198. Ali Amininejad, Roohollah Jamaati, Seyed Jamal Hosseinipour،Achieving superior strength and high ductility in AISI 304 austenitic stainless steel via asymmetric cold rolling،MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING،2019.
199. Fatemeh Goli, Roohollah Jamaati،Effect of strain path during cold rolling on the microstructure, texture, and mechanical properties of AA2024 aluminum alloy،Materials Research Express،2019.
200. Mahmood Eskandari ghadi, Hamed Jamshidi Aval, Roohollah Jamaati،The study of thermomechanical and microstructural issues in dissimilar FSW of AA6061 wrought and A390 cast alloys،Journal of Manufacturing Processes،2019.
201. Esmaeil Damavandi, Salman Nourouzi, Sayed Mahmood Rabiee, Roohollah Jamaati،Texture and microstructure evolution of A390 aluminum alloy during ECAP،Materials Research Express،2019.
202. Ebrahim Tolouie charani, Roohollah Jamaati،Asymmetric cold rolling: A technique for achieving non-basal textures in AZ91 alloy،MATERIALS LETTERS،2019.
203. Mohammad mahdi Moradi, Hamed Jamshidi Aval, Roohollah Jamaati, Sajjad Amirkhanlou, Shouxun Ji،Effect of SiC nanoparticles on the microstructure and texture of friction stir welded AA2024/AA6061،MATERIALS CHARACTERIZATION،2019.
204. Esmaeil Damavandi, Salman Nourouzi, Sayed Mahmood Rabiee, Roohollah Jamaati،Effect of ECAP on microstructure and tensile Properties of A390 aluminum alloy،TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA،2019.
205. Mahla Afifeh, Seyed Jamal Hosseinipour, Roohollah Jamaati،Nanostructured copper matrix composite with extraordinary strength and high electrical conductivity produced by asymmetric cryorolling،MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING،2019.
206. Seyede marjan Bararpour hamzekolaei, Hamed Jamshidi Aval, Roohollah Jamaati،Modeling and experimental investigation on friction surfacing of aluminum alloys،JOURNAL OF ALLOYS AND COMPOUNDS،2019.
207. Zahra Rahmati dehkordi, Hamed Jamshidi Aval, Salman Nourouzi, Roohollah Jamaati،Modeling and experimental study of friction surfacing of AA2024 alloy over AA1050 plates،Materials Research Express،2019.
208. Abolghasem Darmiani, Salman Nourouzi, Roohollah Jamaati،Microstructure and mechanical properties of AA6063 aluminum alloy wire fabricated by friction stir back extrusion (FSBE) process،International Journal of Minerals Metallurgy and Materials،2019.
209. Seyede marjan Bararpour hamzekolaei, Hamed Jamshidi Aval, Roohollah Jamaati،Mechanical alloying by friction surfacing process،MATERIALS LETTERS،2019.
210. Hossein Aghamohammadi, Seyed Jamal Hosseinipour, Sayed Mahmood Rabiee, Roohollah Jamaati،Texture-Microstructure Correlation in Hot-Rolled AZ31،TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS،2019.
211. Roohollah Jamaati،Nanostructured AA5005/Al2O3 composite manufactured by anodising and accumulative roll bonding،MATERIALS SCIENCE AND TECHNOLOGY،2018.
212. Fatemeh Goli, Roohollah Jamaati،Asymmetric cross rolling (ACR) A novel technique for enhancement of Goss/Brass texture ratio in Al-Cu-Mg alloy،MATERIALS CHARACTERIZATION،2018.
213. Fatemeh Goli, Roohollah Jamaati،Intensifying Goss/Brass texture ratio in AA2024 by asymmetric cold rolling،MATERIALS LETTERS،2018.
214. Mohammad mahdi Moradi, Hamed Jamshidi Aval, Roohollah Jamaati, Sajjad Amirkhanlou, Shouxun Ji،Microstructure and texture evolution of friction stir welded dissimilar aluminum alloys AA2024 and AA6061،Journal of Manufacturing Processes،2018.
215. Ebrahim Tolouie charani, Roohollah Jamaati،Effect of ?-Mg17Al12 phase on microstructure, texture and mechanical properties of AZ91 alloy processed by asymmetric hot rolling،MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING،2018.
216. Roohollah Jamaati،Unexpected Cube texture in cold rolling of copper،MATERIALS LETTERS،2017.
217. Mohammad mahdi Moradi, Hamed Jamshidi Aval, Roohollah Jamaati،Effect of pre and post welding heat treatment in SiC-fortified dissimilar AA6061-AA2024 FSW butt joint،Journal of Manufacturing Processes،2017.
218. Mohammad mahdi Moradi, Hamed Jamshidi Aval, Roohollah Jamaati،Microstructure and mechanical properties in nano and microscale SiC-included dissimilar friction stir welding of AA6061-AA2024،MATERIALS SCIENCE AND TECHNOLOGY،2017.
219. Roohollah Jamaati, Mohammad Reza Toroghinejad, Sajjad Amirkhanlou, Hossein Edris،Effect of Particles on Continuous and Discontinuous Recrystallization of Nanostructured Interstitial Free Steel،JOM،2016.
220. Roohollah Jamaati, Mohammad Reza Toroghinejad, Sajjad Amirkhanlou, Hossein Edris،Strengthening mechanisms in nanostructured interstitial free steel deformed to high strain،MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING،2015.
221. Roohollah Jamaati،Annealing texture of nanostructured IF steel،MATERIALS CHARACTERIZATION،2015.
222. Roohollah Jamaati،Annealing Texture of Nanostructured Steel-Based Nanocomposite،JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE،2015.
223. Roohollah Jamaati, Mohammad Reza Toroghinejad, Ali Sonboli, Jerzy A. Szpunar،Annealing texture of nanostructured steel-based composite،MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING،2015.
224. Roohollah Jamaati, Mohammad Reza Toroghinejad, Sajjad Amirkhanlou, Hossein Edris،Microstructural evolution of nanostructured steel-based composite fabricated by accumulative roll bonding،MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING،2015.
225. Roohollah Jamaati, Mohammad Reza Toroghinejad, Sajjad Amirkhanlou, Hossein Edris،On the Achievement of Nanostructured Interstitial Free Steel by Four-Layer Accumulative Roll Bonding Process at Room Temperature،METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE،2015.
226. Roohollah Jamaati, Mohammad Reza Toroghinejad, Sajjad Amirkhanlou, Hossein Edris،Production of nanograin microstructure in steel nanocomposite،MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING،2015.
227. Roohollah Jamaati, M. R. Toroghinejad, H. Edris, M. R. Salmani،Fracture of steel nanocomposite made using accumulative roll bonding،MATERIALS SCIENCE AND TECHNOLOGY،2014.
228. Roohollah Jamaati, Mohammad Reza Toroghinejad, M. A. Mohtadi و Bonab, Hossein Edris, Jerzy A. Szpunar, Mohammad Reza Salmani،Texture Development of ARB-Processed Steel-Based Nanocomposite،JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE،2014.

Roohollah Jamaati

Associate Professor Roohollah Jamaati

Roohollah Jamaati

Subjects Taught

Papers in Journals