×
تنظیمات ویجت
Toggle navigation
Courses
Articles In Conferences
Articles In Publications
Thesis
Books
About Me
Books
Thesis
Articles
Courses
CV
Personal Card
Download Card
Close
FA
Kurosh Sedighi
Associate Professor
Retired
College: Mechanical Engineering
Department: ThermoFluids
About Me
Books
Thesis
Articles
Courses
CV
Personal Card
Download Card
Close
FA
Associate Professor Kurosh Sedighi
Retired
College: Mechanical Engineering - Department: ThermoFluids
Google Scholar
Kurosh Sedighi
Associate Professor
College: Mechanical Engineering
Department: ThermoFluids
Thesis
1.
Development of a Numerical Model to predict ductile fracture in AA 6061-T6 Aluminum Sheet Tensile Test under Ultrasonic Vibrations in Different Stress States ، مريم گران قراخيلي ، 2026/6/29
2.
Numerical and experimental study of a light agriculture spark ignition engine with ethanol-gasoline fuel in order to determine the optimal spark angle and fuel composition by specifying the engine actual operating conditions ، علي مصطفوي ، 2025/9/22
3.
Experimental and Numerical investigation of forced convection heat transfer in Non-Newtonian ferrofluid under variable magnetic field in annulus zone ، مهران ولي زاده ، 2025/9/22
4.
Improving the resistance to fatigue and reducing the propagation of cracks in the ring gear spring plate in the cement rotary kiln ، علي فخري شاكر العبيدي ، 2025/9/4
5.
Numerical and experimental study to reduce the detail chemical kinetics mechanism for gasoline / diesel- waste cooking oil (WCO) biodiesel for use in RCCI engine ، صالح طالش اميري ، 2025/3/17
6.
Developing an efficient random fiber generation algorithm for unidirectional fiber reinforced composites with the aid of particle swarm optimization method ، حسين ماهر سعد حيدر ، 2025/1/5
7.
Dynamic Evaluation of Ankle Joint Disorders Effect on Its axis of rotation and Design of a Proper robotic Mechanism for Rehabilitation . ، رضا عارفي ، 2024/9/19
8.
Experimental study of mono/multi microemulsion generation of non-Newtonian fluid ، مرسل مومني لاريمي ، 2024/8/6
9.
Experimental and Numerical Study of Pintle Injector Performance ، سيد عسكري مهدوي ، 2024/1/30
10.
Numerical Evaluation the Impact of Employing a Vortex Generator on Two-Phase Heat Transfer in an Evaporative Condenser ، سعيد مرادي ، 2024/1/29
11.
Experimental and numerical investigation of Non-Newtonian fluids effect on Electerthermal Pumping ، نيما هدايتي گودرزي ، 2024/1/29
12.
Study of ultrasonic vibration effects on hydroforming deep drawing process ، رضا قاسمي ، 2024/1/8
13.
Joining Two Dissimilar Metals Of Aluminum To Steel By Using Ultrasonic-Assisted Friction Stir Welding ، واثق سليم عبدالله ، 2023/9/13
14.
Experimental investigation of heat transfer enhancement in helically coiled heat exchanger by adding annular fins on the outer surface of the tube and numerical optimization of fin s geometry ، عادل كريم بخشي رستمي ، 2023/5/29
15.
Simulating the cooling performance of a single-cylinder diesel engine to become a marine engine using GT POWER software ، مهدي اسماعيلي ، 2023/2/8
16.
A numerical simulation of thermal performance in the latent heat storage unit with eccentricity and internal spiral fin ، سيده ناديا نبوي جلودار ، 2023/2/6
17.
Experimental and numerical investigation of evaporative condenser important parameters on functional charactristics of an air conditioning system ، بهزاد سياوش املي ، 2023/2/5
18.
Implementation of control strategies to energy consumption management in a water pumping station; Heydariyeh (Iraq) ، حسنين الكيم ، 2023/2/5
19.
Experimental study of particles separation using inertial force in a microchannel ، مهدي توحيدي كريمي ، 2023/2/5
20.
Numerical investigation of combustion in cement rotary kiln to increase interest ، علي طوراني ، 2023/1/31
21.
Vibration Analysis of Doubly Curved Laminated Composite Sandwich Shell with Flexible Core and Single Delamination ، سمن صدري پور ، 2023/1/18
22.
Designing a microchannel for separating particles with different sizes utilizing bulk acoustic waves ، خالد قيس عبيد الصنكور ، 2022/12/31
23.
Experimental investigation of slug initiation and flow pattern maps of Gas-liquid twophase flow in pipeline-riser system ، مهشيد وطني ، 2022/12/21
24.
Experimental study of combined ventilation (automatic air conditioning and mechanical ventilation) in the comfort conditions of an isolated room ، جواد جواد ، 2022/10/26
25.
Experimental and numerical investigation of incremental forming of AA 5052 aluminium alloy assisted by warm fluid ، نيما نائيج پور ، 2022/9/14
26.
Investigation of Conducting Surfaces’ effects on pumping and mixing efficiency by considering the induce-charged electroosmotic flow in a sinusoidal microchannel ، عليرضا حسيبي ، 2022/9/14
27.
Numerical investigation on heat transfer of minichannel with Circular arrangement of pinfin For concentrated photovoltaic system cooling with impingement jet ، مازيار ابدي ، 2022/9/14
28.
Experimental study of a horizontal axis tidal turbine to investigate the effects of blade pitch angle and flow direction on its performance in the presence of waves ، اميرحسين فرهودي ، 2022/9/14
29.
Numerical Evaluation On The Effects of using Hybrid Nanofluid on The performance of a parabolic solar collector Rquipped with Turbulator ، محمدجواد داوديان ، 2022/9/14
30.
Experimental and numerical investigation of Electro0thermal method in enhancement of pumping of high conductivity fluids inside microchannels ، اميرحسين قاسمي ، 2022/7/30
31.
Experimental and numerical investigation of focusing and separation of particles by combining elasto-inertial and acoustic methods in hybrid microfluidics ، آرش محبوبي دوست ، 2022/7/26
32.
Feasibility study of flanging process on thin-walled aluminum rings using incremental forming ، محمد گران پاشا ، 2022/5/14
33.
Heat transfer Analysis of Non-Newtonian Fluid in Microchannel by Lattice Boltzmann Method ، ميلاد گرائيلي نژاد ، 2022/2/16
34.
Numerical Investigation the Effect of Geomettrical and operational in the Baseboard Radiator ، علي اكبر حسين پور ، 2022/2/16
35.
Improving the dynamic performance of a catamaran in a regular wave by changing hull form using SBD method ، مهتاب قرباني مقدم ، 2022/2/16
36.
Investigation of the effects of geometrical and physical parameters and their optimization for bio particle separation using dielectrophoresis phenomenon ، محمود حسين پورورزي ، 2022/2/16
37.
Experimental and numerical investigation of droplet behavior on surfaces with different contact angles ، كيميا مبرهن دليلي ، 2022/2/14
38.
Numerical simulation of particle tracing distribution in helical coil heat exchanger ، فائزه آهنگر فيروزجائي ، 2022/2/12
39.
Aplication For Automatic Die Design on SolidWorks Platform ، سعيد داودي ، 2022/2/12
40.
Studying and modeling a CCHP system driven with internal combustion engine from energy and exergy viewpoint in order to improve its performance ، رضا آقاگل زاده سيلاخور ، 2022/2/9
41.
Experimental Study of a Humedification-Dehumedification Solar Disalination system for Investigating the Performance ، احسان جعفرپور ، 2022/2/8
42.
Numerical and Experimental Study of a Real Model Water Distribution Network, Using Transient Flow Analysis Based on Pulsatile Demand and Pressure Real-Time Control ، سعيد محمدزاده نقارچي ، 2022/1/26
43.
Numerical Study on the Effect of Changing the Inlet Geometry of the Oscillating Water Column on Improving the performance ، سيدسينا رضوي ، 2022/1/16
44.
Gasoline Spark Ignition Engine Down-Sizing via Natural Gas Fuel Shifting in order to Improve Performance within Low-oad Regin ، محمدمصطفي نمار ، 2021/9/16
45.
A Novel Method For Producing Unequal Sized Droplets in Microchannels ، حسين گل پور ، 2021/9/16
46.
Numerical simulation of turbulent flow and convective heat transfer in a double pipe heat exchanger with twisted oval tube ، علي اكبر شيخي عزيزي ، 2021/9/15
47.
Analysis of optimum operating conditions of a polymer membrane in a dead end fuel cell stack ، احمد وهابي خنكدار ، 2021/9/15
48.
Heat Transfer Investigation in the Triplex-Tube Latent Heat Exchanger with PCM, Concentrating on Flow Direction, Nanoparticles and Multiple PCM Implementation ، محمدامين عرفاني مقدم ، 2021/9/15
49.
Experimental study of using Porous Plates to improve evaporation performance in a solar distiller ، محمدرضا عباس پور ، 2021/9/7
50.
Experimental analysis on the impact of biodiesel / diesel blend ratios on the performance of a Compression Ignition engine ، رضا بهاري ، 2021/8/29
51.
Design and analysis of green/clean integrated power plant for production of power, drinking water and liquid fuels. ، ميلاد نوري شيردار ، 2021/7/3
52.
Evaluating heat transfer and optical treatment of Linear Fresnel Reflector solar unit utilizing nanofluid ، زهرا ابراهيم پور بورا ، 2021/3/2
53.
Experimental study of suitable operating conditions for fuel cell stack with polymer electrolyte membranes ، نريمان اسلامي ، 2021/2/17
54.
Sensitivity analysis and multi-objective optimization of energy, exergy, economic, and environment (4E) of a novel combined thermodynamic cycle for waste heat recovery of Internal Combustion Engine (ICE) ، همايون بوداغي ، 2021/2/16
55.
The effect of flower pattern on longitudinal bowing defect in roll forming process ، سيدميثم جعفريان اميري ، 2020/11/23
56.
Numerical investigation for thermal performance of nanofluid within a parabolic solar collector by using turbulator ، شقايق ابرازه ، 2020/10/21
57.
Experimental study of strain gauge fabrication design using a 3D printer ، سيدحسين ميرزاده درزي ، 2020/9/19
58.
Numerical simulation of a LTC dual fuel engine for investigating the effects of the water injection in combustion chamber. ، صالح طالش اميري ، 2020/9/6
59.
Numerical simulation of the RCCI engine installed in the Engine Test Laboratory of Noshirvani University of Technology in order to investigate the effects of spraying time and span ، اميرحسين فخاري ، 2020/9/6
60.
Experimental investigation of manufacturing bimetallic tubes using forward extrusion at elevated temperature ، عليرضا قلي زاده ، 2020/6/1
61.
Indirect Damage detection of a bridge using vibration response of a passing Vehicle ، سيدمازيار مرعشي ، 2020/5/18
62.
Investigation of turbulent flow on tube bundle using Lattice Boltzmann method ، علي مريخي ، 2020/2/5
63.
Numerical investigation of pumping Newtonian and non-Newtonian fluids by electrothermal force ، آرمين عابدي پرچيكلائي ، 2020/2/4
64.
Investigation of Energy Harvesting in Bistable Composite Laminate Plates ، سيدمحمدرضا جعفرزاده ، 2020/2/4
65.
Experimental investigation of passive fluidic oscillators effect on forced convective heat transfer a pipe ، سهيل غنمي ، 2020/2/4
66.
Numerical and Experimental Investigation of the Effects of Physical and Operational Parameters on Ice Storage Performance in Cold Storage System ، سيدسهيل موسوي اجارستاقي ، 2020/2/3
67.
Experimental And Numerical Study of Injector Nozzle Coking Effects on High-Pressure Fuel spray Characteristics ، ميثم شيخ وظايفي ، 2020/2/1
68.
Experimental study to determine suitable injection time of pilot fuel in order to control of combustion phasing in reactivity controlled cimpression ignition (RCCI) engine ، سيدصادق مطلبي حسن كلا ، 2020/1/7
69.
Numerical Investigation of Geometrical and Operational Parameters Effects on an Ice Storage Helical-Coil Heat Exchanger Equipped with Connecting Plates ، فرهاد افشارپناه ، 2019/11/9
70.
Numerical Simulation of the Charge Process in Serpentine Tube Ice Storage System Equipped with Connection Plates ، خشايار پاك زاد ، 2019/11/9
71.
calibration of magnetic sensor on a navigation system in a vehicle ، نعيم صيادروشن ، 2019/9/11
72.
Investigation the non0Newtonian and periodic blood flow in vessel stasis with presence of magnetic field by multi0block Lattice Boltzmann Method ، بهنام دوجي نژاد ، 2019/9/11
73.
Simulation of heat transfer augmentation for phase change materials in a triplex tube heat exchanger using fin and nanoparticles for heat storage ، ابوالفضل نعمت پوركشتلي ، 2019/9/11
74.
Numerical Simulation of Acoustic Streaming and Particle Manipulation induced by Acoustophoresis ، دنيا شاهاني شلماني ، 2019/9/9
75.
Numerical investigation of hydrodynamic response for spar floating platform subjected with configuration mooring line ، شيما تفضلي ، 2019/9/4
76.
Numerical simulation of air pollution in South Pars using Goussian modeling ، مريم غلامان ، 2019/2/5
77.
Thermal Management of PEM Fuel Cell Stack using Metal Foam through Numerical and Experimental approaches ، يوسف وظيفه شناس ، 2019/1/22
78.
Experimental investigation and simulation on hydroforming deep drawing process for making Brake Booster Front Shell ، خديجه اميرپورباروق ، 2018/9/18
79.
3D Simulation Study on Effect of Equivalence Ratio on Combustion Performance of a DI-LTC Engine ، عطيه تقي زاده فيروزجايي ، 2018/9/18
80.
Experimental Study of Heat Distribution on Dead End and Open End PEM Fuel Cell ، سيدمجيد رهگشاي ، 2018/9/18
81.
Numerical simulation of droplet dynamics detachment in fuel cell ، محدثه خزائي پول ، 2018/9/17
82.
Melting process analysis of phase change materials in a flat spiral tube heat exchanger ، سعيد ساعدي اردهائي ، 2018/9/16
83.
Melting process investigation of phase change materials in a shell and helix tube heat exchanger using heat pipe ، عباس ابراهيمي ، 2018/9/16
84.
Fully explicit DPD simulation of electrophoresis in nano-colloidal electrolytes ، حميد حسن زاده افروزي ، 2018/1/30
85.
Development Of a control-oriented structure for LTC engines ، مرتضي فتحي ، 2017/11/15
86.
Experimental And Numerical Study of Using Porous Medium On Characteristics of High Pressure Fuel Spray ، ايمان سهرابي اصل ، 2017/9/21
87.
Experimental and Numerical Study on the Effect Of using a Swirl Generator with Lobed Cross Section Heat transfer and Pressure Drop in a tube ، محمد جعفري ، 2017/9/17
88.
Experimental Study and Optimization Of Still System by Using PCMs and Passive system ، سيد شرف الدين حسيني ، 2017/8/1
89.
Experimental analysis water mangement at dead end H2/o2 PEM fuel cell stack ، مظاهر رحيمي اسبويي ، 2017/5/24
90.
Investigating of Specific Lapping Process Parameters Effect on Surface Integrity Of Inconel 718 Superally ، جعفر رضائي دشت ارژنه
91.
Experimental and Numerical Investigation Of a Horizontal Axis Tidal Turbine to Determine The Installation Depth in Presence Of Surface Waves ، سميه فيضي
92.
Numerical prediction and experimental determination of damage in incremental flanging of sandwich sheets ، احمد قاسم محمد الربيعي
93.
Numerical and experimental investigation due to fuel and route, on burner performance of a furnace in Kermanshah oil refining ، حسين رئيسي جلودار
94.
Experimental investigation of the use of waste oil biodiesel fuel in RCCI engine to evaluate the effects of fuel injection timing and fuel injection pressure on engine performance ، اشكان قائدي
95.
Numerical Investigation of the Influence of Fin Geometrical Parameters and the Use of Hybrid Nanoparticles on the Heat Storage Process in a Solar Air Heater Equipped with Phase Change Materials ، محمدحسين رضواني
96.
Heat Transfer Enhancement of a Microchannel Heat Sink using Nanofluids and Genetic Algorithm-assisted Geometry Optimization ، ماهان اصفهانيان
97.
Evaluation of MTU 4000 R43L Rail Engine Cooling System in order to convert it into a marine engine and consider heat recovery ، حميد عظيمي