faculty370203en

activity_title	startedAt	endedAt
Analysis of Metal Forming	(not set)	(not set)
Applied Plasticity and Metals Forming	(not set)	(not set)
Material Science	(not set)	(not set)
Metallurgy	(not set)	(not set)
Metallurgy in production	(not set)	(not set)
Production Method and Workshop	(not set)	(not set)
Mechanics of Composite Materials	(not set)	(not set)
Metal forming	(not set)	(not set)
Industrial Materials	(not set)	(not set)
Metal Deformation	(not set)	(not set)
k	(not set)	(not set)
Selected Topics in Manufacturing 2	(not set)	(not set)
Mechanical properties Laboratory 1	(not set)	(not set)
Research methods in materials engineering	(not set)	(not set)
Mechanical properties of Materials 1	(not set)	(not set)
Dislocation theory	(not set)	(not set)
Metal Forming 1	(not set)	(not set)
khazesh	(not set)	(not set)
nabejaei theory	(not set)	(not set)
Metal Forming Laboratory	(not set)	(not set)

Papers in Journals

1. Hossein Hassanpour shirsavar, Roohollah Jamaati, Seyed Jamal Hosseinipour،Effect of gradient microstructure on the mechanical properties of aluminum alloy،MATERIALS CHARACTERIZATION،2021.
2. Ali Amininejad, Roohollah Jamaati, Seyed Jamal Hosseinipour،Influence of Deformation and Post-Annealing Treatment on the Microstructure and Mechanical Properties of Austenitic Stainless Steel،TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS،2021.
3. , Seyed Jamal Hosseinipour, Roohollah Jamaati،Effect of Temperature and Strain on the Microstructure and Mechanical Properties of AA6061/AZ31 Laminated Composite Produced by Hot Forge Bonding،TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS،2021.
4. , Seyed Jamal Hosseinipour, Hamed Jamshidi Aval،Multi-objective Optimization of HMGF Process Parameters for Manufacturing AA6063 Stepped Tubes using FEM-RSM،International Journal of Engineering،2021.
5. Mahla Afifeh, Seyed Jamal Hosseinipour, Roohollah Jamaati،Effect of post-annealing on the microstructure and mechanical properties of nanostructured copper،MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING،2021.
6. , Seyed Jamal Hosseinipour, A Shamsi و Sarband،Numerical Analyses of Manufacturing of an AA8111 Pin-shaped Bipolar Plate by Hot Metal Gas Forming،International Journal of Engineering،2021.
7. Seyed abbas Hasasi, Majid Abbasi, Seyed Jamal Hosseinipour،Effect of Squeeze Casting Parameters on the Wear Properties of A390 Aluminum Alloy،International Journal of Metalcasting،2021.
8. Hossein Aghamohammadi, Seyed Jamal Hosseinipour, Sayed Mahmood Rabiee, Roohollah Jamaati،Effect of hot rolling on microstructure, crystallographic texture, and hardness of AZ31 alloy،MATERIALS CHEMISTRY AND PHYSICS،2021.
9. Hassan Kargar, Seyed Jamal Hosseinipour, Hamed Jamshidi Aval،A novel method for manufacturing microchannels of metallic bipolar plate fuel cell by the hot metal gas forming process،Journal of Manufacturing Processes،2020.
10. , Mohammad Bakhshi و jooybari, Hamid Gorji, Seyed Jamal Hosseinipour, M. HoseinzadehAmirdehi،Investigation of the Effect of Die Parameters on the Mechanical Properties of Pure Copper in The Combined Process of Torsional Extrusion and ECAP،Journal of Stress Analysis،2020.
11. Hossein Hassanpour shirsavar, Roohollah Jamaati, Seyed Jamal Hosseinipour،A novel technique to form gradient microstructure in AA5052 alloy،MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING،2020.
12. , Seyed Jamal Hosseinipour, Mohammad Javad Mirnia،Prediction of exit profile distortion in forward extrusion process using Riemann mapping theorem and upper bound method،MECCANICA،2020.
13. Ali Amininejad, Roohollah Jamaati, Seyed Jamal Hosseinipour،Improvement of strength-ductility balance of SAE 304 stainless steel by asymmetric cross rolling،MATERIALS CHEMISTRY AND PHYSICS،2020.
14. Hossein Aghamohammadi, Seyed Jamal Hosseinipour, Sayed Mahmood Rabiee, Roohollah Jamaati،Influence of Crystallographic Texture on the Corrosion Product Morphology and Corrosion Rate of AZ31 Plate in Simulated Body Fluid،JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE،2020.
15. Mahla Afifeh, Seyed Jamal Hosseinipour, Roohollah Jamaati،High-strength and high-conductivity nanograined copper fabricated by partial homogenization and asymmetric rolling،MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING،2019.
16. , Mohammad Bakhshi و jooybari, Seyed Jamal Hosseinipour, Hamid Gorji،Improvement of Die Corner Filling of Stepped Tubes Using Warm Hybrid Forming،International Journal of Engineering, Transactions A: Basics،2019.
17. , Seyed Jamal Hosseinipour, Hamed Jamshidi Aval،Optimization of Hot Metal Gas Forming by Taguchi Method for Production Step-tubes from AA6063،Amirkabir Journal of Mechanical Engineering،2019.
18. Ali Amininejad, Roohollah Jamaati, Seyed Jamal Hosseinipour،Achieving superior strength and high ductility in AISI 304 austenitic stainless steel via asymmetric cold rolling،MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING،2019.
19. , Seyed Jamal Hosseinipour, Hamed Jamshidi Aval،Impact of Loading Rate in Hot Tube Gas Forming of AA6063،International Journal of Advanced Design and Manufacturing Technology،2019.
20. , Seyed Jamal Hosseinipour،Experimental investigation of forming metallic bipolar plates by hot metal gas forming (HMGF)،SN Applied Sciences،2019.
21. Hossein Aghamohammadi, Seyed Jamal Hosseinipour, Sayed Mahmood Rabiee, Roohollah Jamaati،Texture-Microstructure Correlation in Hot-Rolled AZ31،TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS،2019.
22. Mahla Afifeh, Seyed Jamal Hosseinipour, Roohollah Jamaati،Nanostructured copper matrix composite with extraordinary strength and high electrical conductivity produced by asymmetric cryorolling،MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING،2019.
23. , Seyed Jamal Hosseinipour, Hamed Jamshidi Aval،Tearing criterion and process window of hot metal gas forming for AA6063 cylindrical stepped tubes،INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY،2019.
24. , Seyed Jamal Hosseinipour, Mohammad Bakhshi و jooybari،Analysis of Void Growth During Superplastic Deformation of Commercial AL5083 Alloy،Iranian Journal of Science and Technology-Transactions of Mechanical Engineering،2018.
25. , Seyed Jamal Hosseinipour, Mohammad Bakhshi و jooybari،Theoretical FLD Prediction Based on M-K Model using Gursons Plastic Potential Function for Steel Sheets،Procedia Engineering،2017.
26. , Mohammad Bakhshi و jooybari, Hamid Gorji, Seyed Jamal Hosseinipour،Experimental and numerical analysis of hydrodynamic deep drawing assisted by radial pressure at elevated temperatures،INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY،2017.
27. Saeed Bemanifar, Mohammad Rajabi, Seyed Jamal Hosseinipour،Microstructural Characterization of Mg-SiC Nanocomposite Powders Fabricated by High Energy Mechanical Milling،Silicon،2017.
28. Nafiseh Mohammadtabar, Mohammad Bakhshi و jooybari, Seyed Jamal Hosseinipour, Hamid Gorji،Feasibility study of a double-step hydroforming process for fabrication of fuel cell bipolar plates with slotted interdigitated serpentine flow field،INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY،2016.
29. , Salman Nourouzi, Mohammad Bakhshi و jooybari, Seyed Jamal Hosseinipour،Experimental investigation of the effect of temperature in semisolid casting using cooling slope method،PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING،2016.
30. , Mohammad Bakhshi و jooybari, Seyed Jamal Hosseinipour, Hamid Gorji،A new process of forming metallic bipolar plates for PEM fuel cell with pin-type pattern،INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY،2015.
31. Reza Akbari Alashti, , Seyed Jamal Hosseinipour،Experimental and numerical investigation of ductile damage effect on load bearing capacity of a dented API XB pipe subjected to internal pressure،ENGINEERING FAILURE ANALYSIS،2015.
32. , Ramin Hashemi, Seyed Jamal Hosseinipour،Experimental and theoretical investigation of strain path change effect on forming limit diagram of AA5083،INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY،2015.
33. , kh. khalili, S Y Ahmadi, Seyed Jamal Hosseinipour،Experimental and finite element simulation investigation of axial crushing of grooved thin-walled tubes،INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY،2015.
34. Reza Akbari Alashti, , Seyed Jamal Hosseinipour،Load bearing capacity of a dented aluminum pipe sujected to internal pressure considering the effect of ductile damage،Latin American Journal of Solids and Structures،2015.
35. , Salman Nourouzi, Mohammad Bakhshi و jooybari, Seyed Jamal Hosseinipour،Experimental investigation of thixoforging parameters effects on the microstructure and mechanical properties of the helical gearbox cap،Journal of Mechanical Science and Technology،2014.
36. , Seyed Jamal Hosseinipour, Mohammad Bakhshi و jooybari،Failure Prediction during uniaxial superplastic tension using finite element method،Iranian Journal of Materials Forming،2014.
37. , Salman Nourouzi, Mohammad Bakhshi و jooybari, Seyed Jamal Hosseinipour،Investigation of the controlled atmosphere of semisolid metal processing of A356 aluminium alloy،Journal of Mechanical Science and Technology،2014.
38. , Reza Akbari Alashti, Seyed Jamal Hosseinipour،Comparison of Ductile Fracture Models on Load Bearing Capacity of a Dented Aluminum Pipe Subjected to Internal Pressure،ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING،2014.
39. , Seyed Jamal Hosseinipour, Salman Nourouzi, Hamid Gorji،A different approach for considering the effect of non-proportional loading path on the forming limit diagram of AA5083،MATERIALS and DESIGN،2013.
40. , Seyed Jamal Hosseinipour, Mohammad Bakhshi و jooybari, Mohsen Shakeri،The Effect of Geometric Parameters of Conical Cups on the Preform Shape in Two-Stage Superplastic Forming Process،JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE،2013.
41. , Seyed Jamal Hosseinipour, H. D. Azodi،An investigation into the effect of strain rate on forming limit diagram using ductile fracture criteria،MECCANICA،2012.
42. , Abolfazl Zahedi, Mohammad Bakhshi و jooybari, Seyed Jamal Hosseinipour, Dorel BANABIC،OPTIMIZITATION OF THE PRESSURE PATH IN SHEET METAL HYDROFORMING،Proceedings of the Romanian Academy Series A-Mathematics Physics Technical Sciences Information Science،2012.
43. , , Mohammad Bakhshi و jooybari, Hamid Gorji, Salman Nourouzi, Seyed Jamal Hosseinipour،Novel combined standard hydromechanical sheet hydroforming process،PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE،2010.
44. , Mojtaba Sepehri nia, Seyed Jamal Hosseinipour،Optimization of superplastic hydroforming process of Aluminium alloy 5083،JOURNAL OF MATERIALS PROCESSING TECHNOLOGY،2008.

Seyed Jamal Hosseinipour

Professor Seyed Jamal Hosseinipour

Seyed Jamal Hosseinipour

Subjects Taught

Papers in Journals