×
تنظیمات ویجت
Toggle navigation
Courses
Articles In Conferences
Articles In Publications
Thesis
Books
About Me
Books
Thesis
Articles
Courses
CV
Personal Card
Download Card
Close
FA
Ali Hassani
Assistant Professor
College: Mechanical Engineering
Department: Solid Design
About Me
Books
Thesis
Articles
Courses
CV
Personal Card
Download Card
Close
FA
Assistant Professor Ali Hassani
College: Mechanical Engineering - Department: Solid Design
Google Scholar
Ali Hassani
Assistant Professor
College: Mechanical Engineering
Department: Solid Design
Thesis
1.
Numerical Analysis of a Thermal Storage System with Phase Change Material Mixed with ternary Nanoparticles in a Dish Solar Collector Utilizing Porous Foam ، رامي وادي مطلق المنشداوي ، 2026/9/22
2.
Free Vibration Analysis of a Functionally Graded Trapezoidal Plate under Thermal Loading ، سيدحسين حسيني هنسيجي ، 2026/9/22
3.
Prediction of Steady Two-Dimensional Fluid Dynamics in Laminar Flow Around Polygonal Geometries Using Physics-Informed Neural Networks ، اميرمحمد سلگي ، 2026/9/7
4.
Study of the resin-rich zones effect on the mechanical properties of unidirectional fiber-reinforced composites under hygrothermal conditions ، اميررضا محسني ، 2026/9/5
5.
Experimental modeling of mechanical behavior of ergonomic bed system with variable stiffness ، قيصر سعيد ماصخ ماصخ ، 2026/8/11
6.
Investigation Of Damage caused by thermal fatigue in Polymer composites in the cryogenic conditions by numerical multiscale method ، سيدميثم حسيني ، 2026/1/14
7.
Theoretical and Experimental investigation of Mechanical Properties of 3-D Printed Polymeric Nano-composite and their topology optimization ، عدي كاظم محمد الفحام ، 2025/9/22
8.
Numerical simulation of a Reactivity Controlled Compression Ignition (RCCI) engine with gasoline-diesel- Waste cooking oil biodiesel (WCO) fuel using AVL FIRE software. ، حسين ردائي ، 2025/9/22
9.
Numerical investigation of thermal management of lithium-ion batteries using nanofluid in mini-channel liquid cooling plates ، اميرحسين عبداله پور ، 2025/9/15
10.
Study of mechanical and failure behavior of PEX-AL-PEX multilayer pipes under different working conditions ، امير علاء عليوي الحماسه ، 2025/9/7
11.
Implementation of digital image correlation in mechanical testing of additively manufactured specimens ، سيدعلي رضا كربلائي آقاملكي ، 2025/8/26
12.
Analytical solution of the strain-induced-degradation finite-strain cylinder ، محمدرضا فرخ سير ، 2025/1/26
13.
Mechanical study of bipolar plates in the fuel cells under the pressure loading ، محمدامين كيا ، 2025/1/25
14.
Stress analysis of a screw dislocations in a FGM layer ، ميرمحمد رسولي ، 2025/1/21
15.
Investigation of the effect of electroplastic on the ductile fracture phenomenon of AA6061 alloy sheet to improve ductility ، اميرحسام فرخنده ، 2025/1/8
16.
Developing an efficient random fiber generation algorithm for unidirectional fiber reinforced composites with the aid of particle swarm optimization method ، حسين ماهر سعد حيدر ، 2025/1/5
17.
Optimal design of a shape_memory alloy coupling system ، محمدجواد حسني ، 2024/9/11
18.
Numerical and experimental study of crushing behavior of thin-walled steel multi-cell cylinders ، اشكان محبي هفشجاني ، 2024/9/11
19.
Numerical and experimental investigation of using curved electrode DEP for size-based separation of polystyrene particles in a microchannel ، محسن باقري آزادبن ، 2024/9/9
20.
Numerical investigation of the effect of using barriers with shark skin shape on heat transfer on a horizontal plane in laminar and turbulent flow regimes ، سيدمهدي عمادي ، 2024/9/8
21.
study of the moisture content effect on the mechanical properties of the fiber reinforced concrete ، رامين احمدي دلاور ، 2024/7/29
22.
Investigation nonlinear dynamics of nano- fractional viscoelastic Timoshenko beam with magnetic excitation ، لبابه تقي زاده ، 2024/1/31
23.
Experimentally-bending fatigue investigation of 3D-printed specimens fabricated by the fused deposition modeling ، عمار واثق يونس يونس ، 2024/1/30
24.
Improving the performance of the water distribution system by pressure-driven analysis and adjustment of the emitter coefficient. ، مهدي ضامني كناري ، 2024/1/29
25.
Analysis of free and forced vibrations for curved shape hyperelastic beams ، محسن نياكي نژاد ، 2024/1/29
26.
The new subsurface design of the hydrofoil floating body in order to increase efficiency and economic optimization of floating fuel consumption in seawater fluid with the help of CFD ، جواد يوسفي ، 2024/1/28
27.
The effect of using MWCNT nanotubes for cooling the spiral heat exchanger around high-power magnetic and electric fields ، فريبرز تقي نيا ، 2024/1/28
28.
: numerical study of a shell and tube heat exchanger with blade shaped turbolator ، مسعود پايكار ، 2023/7/1
29.
INVESTIGATION OF THE EFFECT OF SMALL METAL BALL INSTEAD OF MANDREL ON BENDIG OF ALUMINIUM TUBE ، سيدماهان موسوي كاشاني ، 2023/2/5
30.
Determination of the mechanical properties of the gas diffusion layer in different temperatures by micromechanical modeling ، احسان امامي قره حاجلو ، 2023/2/4
31.
Thermomechanical study of the automated fibre placement process for thermoplastic composites manufacturing by the finite element method modeling ، بهاره احمدي ، 2023/1/5
32.
Investigation of mechanical energy absorption capacity of steel thin-walled twisted prism under axial quasi-static compressive load ، ليث كاظم كامل الشباني ، 2022/11/9
33.
Investigating the effect of Total knee replacement misalignment on its performance in walking gait ، محمدرضا رسولي ، 2022/10/29
34.
Bending analysis of a symmetric composite laminated cylindrical shell under hygrothermal conditions ، سيدمحمدرضا استادزاده ، 2022/9/12
35.
Investigation of the effect of floe-forming Process parameters in forming cylindrical AL6063 tubes ، معين رحمتي ، 2022/9/11
36.
Finite element modeling of mechanical behavior of gas diffusion layer in PEM fuel cell ، كامران حسن زاده داودي ، 2022/7/6
37.
An experimental and numerical study into forging of bimetallic components ، آتنا فلاح حاجي بكنده ، 2022/5/25
38.
Analysis of Hygrothermal Effects on Mechanical Behavior of composite plate Using Multiscale Modeling ، مقداد غلامي ، 2022/2/16
39.
Analysis of the thick-walled pressurized polymeric vessels by poro-hyperelasticity ، اميرحسين حسن زاده داودي ، 2022/2/16
40.
Analysis of the non-uniform polymeric rotating disks using poro-hyperelasticity ، مرتضي تقي پوردرزي نقيبي ، 2022/2/16
41.
Numerical investigation of heat transfer in microchannel heat sinks by biomimetics patterns ، فرهاد افتخاري ، 2022/2/16
42.
Evaluation of dimensional accuracy and distortion and how to eliminate it in profile bending process of L-shaped profile of 5083 aluminum alloy with equal sides ، ابوالفضل مولوي ، 2022/2/14
43.
Failure analysis of syntactic foams by micromechanical approach and extended finite element method ، رضا باقريان افراپلي ، 2022/2/14
44.
Analytical and Numerical study for behavior of free vibration of cylindrical and spherical tanks ، حسين بزرگي ، 2022/2/13
45.
The effect of an economizer on the heating installation system performance ، معصومه فلاحي ، 2022/2/13
46.
Modelling mechanical behavior of degradable full-saturated porous Polymer of large deformations ، مهدي كاظميان ، 2022/2/3
47.
Thermodynamic analysis of S-CO2 Brayton cycle integrated with diesel engine as heat-waste recovery system ، امين يخكشي ، 2022/1/15
48.
: Numerical study on upgrading a medium speed Savanius wind turbine by employing two optimization plates with the aim of employing in highways for renewable energy production ، امين نوري ، 2022/1/3
49.
Analysis of the incompressible variable-thickness polymeric rotating disks using large-strain viscoelasticity ، فاطمه اشتواد ، 2021/9/15
50.
Static Analysis of Two Sandwich Panel Structures: with double-layered cross corrugated core and with single-layered intertwined cross corrugated core ، محمد رمضانخاني ، 2021/9/14
51.
Developing a hybrid deformation process comprising incremental sheet forming and stamping ، سعيد خاشعي ورنامخواستي ، 2021/9/14
52.
Finite Element Modeling of Mechanical Behavior of a Self-Healing Micro-Capsule Composite Material under TDCB Test ، مريم آريافر ، 2021/9/11
53.
Numerical investigation of a solar air heater including vortex generators and phase change material (PCM) ، پريسا نژادآذر ، 2021/6/9
54.
Analysis of non-uniform rotating disks made of degradable incompressible polymers through a hyperelastic constitutive model ، حميدرضا حبيبي ، 2021/2/17
55.
A comprehensive study on empirical heat transfer models for homogeneous charge compression ignition engines fueled with natural gas ، مسعود رابطي ، 2021/2/17
56.
Investigation on the Effect of Pulsed Nd:YAG Laser Parameters on the the cutting of on sheet metal ، علي رضازاده ، 2021/2/16
57.
Experimental study of strain gauge fabrication design using a 3D printer ، سيدحسين ميرزاده درزي ، 2020/9/19
58.
Optimization of honeycomb corre composite sandwich panels under out of plane pressure ، سيدمصطفي نصراله پورشيرواني ، 2020/9/16
59.
Design and Mechanical Behavior Analysis of a Morphing Structure Composed of a Fluidic Flexible Matrix Composite Core ، محمدرضا زارعي ، 2020/6/20
60.
Effect of nonlinear pressure path on drawing depth in sheet metal hydroforming ، يحيي قليان جويباري ، 2019/9/11
61.
Mechanical behavior study of four coronary stent models in curved artery using finite element analysis ، پويا صادق زاده ، 2019/9/11
62.
In-plane and out-of-plane vibration analysis of a rotating laminated composite blade ، سيده فرزانه قاسمي شيرسوار ، 2019/9/11
63.
Investigation on the effects of thermal stress and strain on the radiative gas burner wall ، محمدجواد فرحمند حبيبي ، 2019/9/4
64.
Initial blank optimization in deep drawing process (Hydroforming with radial pressure) using ANN coupled with a meta heuristic algorithm ، مقداد غياث ، 2019/8/26
65.
Buckling and Energy Absorption of Cylindrical Composite Sandwich Panels with Flexible Core under Lateral Dynamic Pressure ، سيد علي احمدي ، 2019/7/7
66.
Numerical investigation of fluidic oscillator with vortex amplifier ، اميرحسين عموئي ، 2019/2/6
67.
Numerical simulation of droplet dynamics detachment in fuel cell ، محدثه خزائي پول ، 2018/9/17
68.
Improving the membrane fatigue model in the working conditions of a proton exchange membrane fuel cell ، فاطمه محمد كاظم كاظم
69.
Buckling and vibrational analyses of subsea pipeline with free span condition and under the effect of axial load and geometrical defect ، وحيد حسني
70.
studu of stress distribution in deneted natural ags transmission pipes ، محمدمهدي شريف زاده
71.
Development of a new method for the hot incremental forming of thin-walled titanium tubes assisted by electric current ، محمد رمضاني
72.
Numerical and experimental modeling of mechanical behavior of syntactic foam with aluminum matrix and lightweight aggregate ، رضا صادقپورحاجي
73.
Development of Peridynamic Theory for Analysis of Hyperlastic Materials using Mooney-Rivlin model and Applying it for Modeling a membrane with a circular hole ، عباس رحيمي پطرودي
74.
Numerical and experimental investigation of coated surfaces in dry and lubricated contact ، ابوالفضل ابراهيمي سرست
75.
Bending Analysis of a Laminated Composite Spherical Panel under Uniform Steady-State Hygrothermal Conditions ، علي بهرامي نسب
76.
Vibrations of a sandwich beam with a porous core on an elastic foundation under a moving load ، محمدهادي باقري
77.
Efficiency enhancement of optimization method in the case of porous Timoshenko beam buckling imposing the concentrated and distributed loads implementing parameters' sensitivity ، محمدحسين حسيني
78.
Mechanical behavior and energy absorption capability of 3D-printed honeycomb cellular structures fabricated by fused deposition modeling (FDM) and filled with a foam ، سيدعلي سيدالحسيني
79.
Buckling analysis and optimization of the cantilever functionally-graded porous Timoshenko’ beam subjected to the concentrated and distributed loads ، مرتضي خسرونژاد
80.
Mechanical behavior of a lightweight sandwich structure with metal wired 3D truss core shaped as interlocked trapezoidal waves ، حامد مرادي طاهر
81.
A study of functionally graded thick-walled pressure vessels ، حامد مرادي طاهر