رزومه


EN
حامد جمشیدی اول

حامد جمشیدی اول

استاد

دانشکده: مهندسی مواد و صنایع

گروه: مواد

رزومه
EN
حامد جمشیدی اول

استاد حامد جمشیدی اول

دانشکده: مهندسی مواد و صنایع - گروه: مواد

مقالات

#عنوان مقالهنویسندگاننشریه/همایشتاریخنوع
 
۱Deformation-driven metallurgy of AZ91-Hydroxyapatite composites: Insights into microstructure and corrosion resistanceKimia Jamshidi, Roohollah Jamaati, Hamed Jamshidi AvalMATERIALS CHEMISTRY AND PHYSICS2026مقاله در نشریه
۲Investigation of Underwater Friction Stir Processing on Microstructure, Mechanical Properties, and Wear Resistance of Al-4.4Cu-1.5Mg Alloy Matrix CompositeMorteza Abedi, Hamed Jamshidi Aval, Roohollah JamaatiJOM2026مقاله در نشریه
۳Microstructural Evolution, Performance, and Triboelectric Response of Cu-Fe Composites Processed via Deformation-Driven MetallurgyZahra Sakhaei, Hamed Jamshidi Aval, Roohollah JamaatiEngineering Reports2025مقاله در نشریه
۴Microstructure, mechanical performance, electrical conductivity, and wear resistance of Cu-Fe composites processed via deformation-driven metallurgyZahra Sakhaei, Hamed Jamshidi Aval, Roohollah JamaatiJournal of Materials Research and Technology-JMR and T2025مقاله در نشریه
۵Optimizing Microstructure and Performance of Friction Stir Processed Cu-W Composites: The Impact of Predeformation and Traverse SpeedMasoome Oliaei, Roohollah Jamaati, Hamed Jamshidi AvalADVANCED ENGINEERING MATERIALS2025مقاله در نشریه
۶Hot wear resistance of Cu/Ti2SnC composite wireAmirhossein Jahani, Hamed Jamshidi Aval, Mohammad Rajabi, Roohollah Jamaati, Annabel BraemINTERNATIONAL JOURNAL OF REFRACTORY METALS and HARD MATERIALS2025مقاله در نشریه
۷Microstructure and strength analysis of dissimilar resistance welds between interstitial free (IF) steel and low carbon steelFatemeh Yaghoobi ashrafi, Roohollah Jamaati, Hamed Jamshidi AvalJournal of Materials Research and Technology-JMR and T2025مقاله در نشریه
۸Microstructural characteristics and mechanical behavior of in-situ synthesized AA2024- AlB2 composites produced via friction stir processingMahna Nikzad dinan, Roohollah Jamaati, Hamed Jamshidi AvalJournal of Science-Advanced Materials and Devices2025مقاله در نشریه
۹Underwater Friction Stir Fabrication and Performance Analysis of <scp>AA2024</scp> Composites Reinforced With In Situ <scp>AlB<sub>2</sub></scp>Mahna Nikzad dinan, Roohollah Jamaati, Hamed Jamshidi AvalEngineering Reports2025مقاله در نشریه
۱۰Manufacturing of new dual phase steel with a combination of macro-laminated and micro-laminated morphologyMohammadreza Roodgari, Roohollah Jamaati, Hamed Jamshidi AvalCANADIAN METALLURGICAL QUARTERLY2025مقاله در نشریه
۱۱Enhanced strength-ductility synergy in AA5052 alloy through nano/ultrafine structure induced by asymmetric reverse rolling (ARR)Boshra Ehsani amoli, Roohollah Jamaati, Hamed Jamshidi Aval, Ramezanali Farajollahi, Mousa JavidaniJournal of Materials Research and Technology-JMR and T2025مقاله در نشریه
۱۲Plasma spray coating of HA-Ti-MgO composite on Ti6Al4V alloy substrateNegin Nadian, Salman Nourouzi, Hamed Jamshidi AvalResults in Physics2025مقاله در نشریه
۱۳Effect of thermo-mechanical age hardening on the strength and electrical conductivity of Copper-AA6063 bimetallic wireFarnusheh Sharifian amiri, Seyed Jamal Hosseinipour, Hamed Jamshidi Aval, Roohollah JamaatiHeliyon2025مقاله در نشریه
۱۴Manufacturing AA2024-AlB2 in-situ composites: How the traverse speed during friction stir processing influences microstructure and mechanical characteristicsMahna Nikzad dinan, Roohollah Jamaati, Hamed Jamshidi AvalJOURNAL OF MATERIALS RESEARCH2025مقاله در نشریه
۱۵Cu-Fe Composites Processed by Deformation-Driven Metallurgy: Correlating Structural, Mechanical, Electrical, and Tribological PropertiesZahra Sakhaei, Hamed Jamshidi Aval, Roohollah JamaatiJOM2025مقاله در نشریه
۱۶Influence of asymmetric rolling paths on the microstructure, texture, mechanical behavior, and electrical conductivity of electrolytic tough-pitch copperHanieh Solouki, Roohollah Jamaati, Hamed Jamshidi AvalMATERIALS CHEMISTRY AND PHYSICS2025مقاله در نشریه
۱۷Influence of Al<sub>2</sub>O<sub>3</sub> Content on Microstucture, Mechanical Strength, and Wear Behavior of AA7075 Matrix Composites via Deformation-Driven MetallurgyAlireza Ramzani Darvishi, Hamed Jamshidi Aval, Roohollah JamaatiADVANCED ENGINEERING MATERIALS2025مقاله در نشریه
۱۸Investigation of the influence of deposition time on morphology, crystallographic texture, and corrosion resistance of ZnO coatings on titanium substratesSeyed Reza Torabianfard, Roohollah Jamaati, Hamed Jamshidi AvalSURFACE and COATINGS TECHNOLOGY2025مقاله در نشریه
۱۹Revealing the Morphology, Crystallographic Texture, and Corrosion Resistance of Electrodeposited ZnO Coatings on Pure Titanium SurfacesSeyed Reza Torabianfard, Roohollah Jamaati, Hamed Jamshidi AvalJOM2025مقاله در نشریه
۲۰Friction stir processing: Impact on microstructure, mechanical behavior, and wear resistance of Al-9.2Si-4.9Cu-0.7 Mg alloyNafiseh Abassi, Salman Nourouzi, Hamed Jamshidi AvalJournal of Materials Research and Technology-JMR and T2025مقاله در نشریه
نمایش ۱ تا ۲۰ مورد از کل ۳۳ مورد.