faculty370119en

activity_title	startedAt	endedAt
Strength of Materials 1	(not set)	(not set)
Strength of Materials 2	(not set)	(not set)
Selected Topics in Manufacturing 2	(not set)	(not set)

activity_title	activity_desc	startedAt	endedAt
Optimization of Electrochemical Spark Micromilling (ECSMM) for Microchannel Fabrication on Silica Reinforced-Epoxy Nanocomposite (SRENC) using RSM-GA		01 January 2025	(not set)

Thesis

1. Experimental investigation and finite element modeling of connecting bipolar plates of polymer fuel cell by strip resistance welding process ، رضا نيري ، 2026/9/22
2. Optimizing wire to cable shoe connection with electromagnetic forming method ، محمد رمضاني موزيرجي ، 2026/9/21
3. Finite element study on the stress distribution of sealant in the proton exchange membrane fuel cell ، روزبه محسن سلطاني ، 2026/9/21
4. Studying the effect of geometry and process parameters in order to predict the mechanical properties of porous metal FGM parts in the SLM process ، مريم غافري ، 2026/9/20
5. Numerical and experimental investigation of the effect of different nitrogen concentrations on the anode and cathode sides on the performance of polymer fuel cells ، محمدامين رمضاني اطربي ، 2026/9/19
6. Numerical and Experimental Investigation of Optimal Helical Geometry Using Localized Twisted Tapes ، الطاف حميد ياسين اطميش ، 2026/9/17
7. Ultrasonic Welding Optimization of dissimilar material 3D Printed Parts ، محمد نجاتي خالقي ، 2026/9/7
8. Indoor localization and navigation of robots using a multi-robot system and machine vision ، محمد صيدانلو ، 2026/7/29
9. Development of a Numerical Model to predict ductile fracture in AA 6061-T6 Aluminum Sheet Tensile Test under Ultrasonic Vibrations in Different Stress States ، مريم گران قراخيلي ، 2026/6/29
10. improvement of mechanical properties and corrosion behavior of Tungsten arc welding clad martensitic stainless steel over A-517 ، حسين رستمي ، 2026/4/4
11. An experimental study of the effect of using a combined system of energy storage and heat exchanger on the performance coefficient of refrigeration cycles. ، ميلاد طالبي ، 2026/2/19
12. Acoustic Vibration reduction of flexible blade of rotor using acoustic black hole and negative capacitance ، سجاد فرخي ، 2026/2/19
13. Comparison of tube expansion with electromagnetic forming method using coil and foil evaporation ، علي نوكنده ، 2026/2/17
14. Simulation of Magnetic Fluid (Ferrofluid) Behavior in Solar Collectors to Enhance Heat Transfer ، حبيب زغير ناصر ال شناوه ، 2026/2/15
15. Experimental investigation of mechanical properties of 3D-printed thermoplastic bi-material PLA/TPU by fused deposition modeling ، نازنين ستاري ، 2026/2/9
16. The effect of rubber mandrels in aluminum tube bending ، مصلح عبدالله صالح العيساوي ، 2026/2/8
17. Experimental study of the rotational molding process of high density Polyethylene using Taguchi experimental design in order to improve mechanical properties. ، محمدجواد ملكي علي آباد ، 2026/2/7
18. Investigation of process parameters in electromagnetic cutting of non-metallic materials ، سجاد اكبرزاده للكامي ، 2026/2/3
19. Investigation of mechanical properties of 7075 and 6061 aluminum welding joint using TIG and FSW methods ، ساره ناجي عوده المكاصيص ، 2026/2/1
20. Development of a Numerical Model to predict ductile damage in ball burnishing of Aluminum Sheet using phenomenological ductile fracture criteria ، اميرحسين سخائي ، 2026/1/26
21. Evaluation of mechanical properties on magnetic assisted resistance spot welded joint of low carbon steels ، ازهار امر محمد نافع الملاك ، 2026/1/26
22. Semi-analytical study of nanofluid boundary layer flow on a moving plate in the presence of a magnetic field using a fractional approach ، فاطمه نادعلي نياچاري ، 2026/1/19
23. Electromagnetic forming of tube flanging with compression ، عماد حميد عبدالعباس عبدالعباس ، 2026/1/5
24. Electromagnetic joining of aerospace fuel pipe with cooling sheets ، هاني زيد عطيه الدبي ، 2026/1/5
25. Electromagnetic joining of tubes with compression ، احمد مالك مخيلف الحسيني ، 2026/1/5
26. Analysis of damaged structure in microswitche under the action of electrostatic force ، فاطمه خورشيدي پاجي ، 2025/9/22
27. Manufacturing and optimization of centrifugal pump impeller using sheet forming process ، رضا جان براري گتابي ، 2025/9/22
28. Investigating the effect of tool electrode material on electrical discharge machining efficiency ، پوريا خادمي ، 2025/9/21
29. investigation of the effect of ball burnishing parameters on the surface roughness and hardness of friction stir welded joints ، محسن اكبري ، 2025/9/17
30. Slip management in outdoor environments via sensor fusion and undetermined dynamics of interaction, sensor fusion and estimation of friction coefficient in half model of robot ، ايمان اصغري تيلمي ، 2025/9/15
31. An Investigation into effective parameters on TPIF process of axisymmetric aluminum parts with unconstrained edge ، تارا اسمعيل كردي ، 2025/9/8
32. Improving the resistance to fatigue and reducing the propagation of cracks in the ring gear spring plate in the cement rotary kiln ، علي فخري شاكر العبيدي ، 2025/9/4
33. Development of Numerical Model to Improve the prediction of residual stress , and experimental study of roughness , hardness and residual stress of the surface in the burnishing Process ، حسين روحي ، 2025/8/23
34. Numerical simulation and experimental test of two-point incremental forming of non-axisymmetric aluminum sheet parts without using blank holder ، سياوش عنايتي ، 2025/5/25
35. Monitoring, Recognition, Classification and Grading Of plant / Crops using Agricultural Robots based on Human- Robot Interaction ، ميلاد زيبي شيره جيني ، 2025/3/1
36. Design and simulation of an additional active suspension mechanical system specified for the stretchers of ambulance ، سينا صبا ، 2025/1/27
37. Experimental study on effective parameters on damage in deep drawing process of fiber-metal laminate ، منوچهر مهرپويا ، 2025/1/26
38. Theoretical and Experimental Evaluation and control of Chatter Vibration in Turning Process Using Proposed Variable Rake Angle Tooling Mechanism ، حسين بهروز ، 2025/1/26
39. Investigation of the effect of electroplastic on the ductile fracture phenomenon of AA6061 alloy sheet to improve ductility ، اميرحسام فرخنده ، 2025/1/8
40. Design and development of a hierarchical control system to reduce fuel consumption in a series electric hybrid vehicle ، سيدمحمدرضا سميعي كاشي ، 2024/9/11
41. Design and model in the loop implementation of brake force controller to be used in electronic stability program ، ونوشه قبادي ساروكلائي ، 2024/9/11
42. Numerical and experimental analysis of the effect of fuel and combustion on thermal and structural stresses of a heavy engine cylinder head ، مسيب قلي نياحسن كلائي ، 2024/9/10
43. Active wave cloaking of a plate using piezoelectric actuators in the presence of multiple obstacles. ، صابر خالقي ، 2024/9/7
44. Development of resistance spinning and examination of the parameters ، محسن غفاري ، 2024/9/6
45. Automatic optimization of the initial shape of the sheet in the production of parts with simple rectangular cross section and stepping in the hydroforming process with the help of computer ، رضا موسوي پور ، 2024/2/4
46. Numerical evaluation the effect of cooling system on the performance of the spark ignition engine with Gasoline - ethanol blend fuel. ، مبين حكمت عباس الدجيلي ، 2024/1/31
47. Study of ultrasonic vibration effects on hydroforming deep drawing process ، رضا قاسمي ، 2024/1/8
48. Development of basic model for battery charge estimation status in electric vehicles by hybrid method ، محمد اكبري دوگلسر ، 2023/12/18
49. Numerical study on a linear Fresnel reflector solar system equipped with fins for energy storage using phase change materials and nanoparticles ، علا كاظم جليل جليل ، 2023/9/13
50. Design, manufacturing and calibration of machining piezoelectric dynamometer ، محمدرضا حيدري ، 2023/9/12
51. Investigation of friction welding of aluminum alloy series 2000 with series 5000 ، منيار زهير مصطفي شيخ خليل ، 2023/9/12
52. Review of V- bending electrically assisted forming Al2026 ، محمد نظري ، 2023/9/9
53. Improving the formation of the conical part by multi-stage electromagnetic forming method ، كمند معتقدي ، 2023/9/3
54. Numerical study of effective Parameters on incremental edge flanging of aluminum sheet ، سلام عبدالحسن خضير خضير ، 2023/8/28
55. Investigation of drilling parameters on burr size and dimensional accuracy in Al-7075 ، بهجت عبود جاسم جاسم ، 2023/8/26
56. Experimental investigation of adding carbon nanotubes on mechanical and electrical properties of parts manufactured by fused deposition modeling method ، اميرحسين ملكي ، 2023/8/19
57. Experimental investigation of the performance of a double-pipe heat exchanger: the effect of the geometrical parameters of wire matrix mesh turbulator inserts in the inner tube ، مصطفي فقيه عبدالهي ، 2023/2/6
58. Experimental and numerical study of performance characteristics of Archimedes screw turbine ، محسن زماني ، 2023/2/5
59. Investigation and optimization of effective parameters in Ti6Al4V micro-milling and the effect of lubricant containing nanoparticles on burr size ، سيف اله تنها ، 2022/10/8
60. Experimental study of Mechanical, Structural and Thermal Properties of Multi-scale Hybrid Thermosetting Micro/Nano Composites Reinforced with Melt Spinning Processed Nanocomposite Micro Fibers ، پيمان تركيان ، 2022/9/14
61. experimental investigation on electromagnetic compression of metal_carbon fiber reinforced plastic (CFRP) components in order to create a mechanical joint ، حامد عباسي پورفيروزجاه ، 2022/9/14
62. Investigating the Effect of Piezoelectric Energy Harveting on Dynamic Behavior of Flexible Passive Biped Robot ، معصومه صفرتوبي ، 2022/9/14
63. Experimental study on hydrodynamic performance of an OWSC wave energy converter with hydraulic PTO imposed to Caspian wave characteristics ، غزاله صدري پور ، 2022/9/13
64. Extrusion of high strength steel MO40 ، قاسم كياني ، 2022/9/10
65. Feasibility study of single point incremental forming of AA6061 aluminum sheet at elevated temperature using flame heating ، پويا طاهري ريكنده ، 2022/9/10
66. An investigation into energy absorption of sheet metal parts produced by single point incremental forming ، مهدي قرباني ، 2022/9/4
67. Experimental and numerical investigation of Electro0thermal method in enhancement of pumping of high conductivity fluids inside microchannels ، اميرحسين قاسمي ، 2022/7/30
68. An experimental and numerical study into forging of bimetallic components ، آتنا فلاح حاجي بكنده ، 2022/5/25
69. Experimental study and of finite elements analysis of chip formation in orthogonal turning of AISI 4140 ، رضا قائدرحمتي ، 2022/2/14
70. Numerical and Experimental Investigation of Dynamics of a Semi-Displacement Twin Hull Ship Equipped with Stern Wedge in Regular Wave to Determining Added Resistance ، مصطفي براتي ، 2022/2/13
71. Coating of magnesium implant by laser device ، امير آقاجاني ، 2022/2/13
72. Aplication For Automatic Die Design on SolidWorks Platform ، سعيد داودي ، 2022/2/12
73. forming part of the car chassis using the hydroforming process. ، اميرحسين ابراهيمي ، 2022/2/9
74. Investigation of mechanical properties and warpage of short fiber reinforced plastics in injection molding ، محمدرضا صدركناري ، 2022/2/1
75. Numerical and Experimental Investigation into Damage Phenomenon in Hydroforming ، فرهاد نجف نيا ، 2021/9/16
76. The feasibility of the manufacturing gears by using injection forging method and energy optimization ، مجتبي نيرين ، 2021/9/16
77. Experimental and Numerical investigation on the performance of surface piercing propeller subject to ventilation and bubble bursting ، عبدالرضا يوسفي ، 2021/9/16
78. modeling and analysis of acoustic wave transmission in functionally graded porous meta structure plate ، آلاله تقي پور ، 2021/9/15
79. Investigation of effective parameters of drilling of bilayer plates of carbon fiber composite (CFRP) and aluminum alloy 7075 ، محمد قاسميان فرد ، 2021/9/15
80. Experimental and simulation Study of the effect of the internal fluid pressure on defects in rotary draw bending of rectangular section tubes ، مسعود قاسم زاده سيدكلا ، 2021/9/14
81. Developing a hybrid deformation process comprising incremental sheet forming and stamping ، سعيد خاشعي ورنامخواستي ، 2021/9/14
82. Expermental analysis of the effect of process parameters in the resistance seam welding of polymer fuel cells metallic bipolar plates ، اميد غلامي ، 2021/6/1
83. Desining a Robust Nonlinear Energy Sink for Vibration Control a Nonlinear Rotor System ، جواد تقي پور ، 2021/3/17
84. Experimental and Numerical investigation of Microemulsion Production using Planar Microfluidic Systems ، مسعود اتوكش ، 2021/2/16
85. An experimental investigation of effect of blowing out from the Airfoil surface on Ice Accreation ، ياسر برزنوني ، 2021/1/20
86. Numerical investigation for thermal performance of nanofluid within a parabolic solar collector by using turbulator ، شقايق ابرازه ، 2020/10/21
87. Experimental investigation and finite element simulation of steel plate forming of ship hull using gas flame heating ، حسن محمدزاده قيه باشي ، 2020/9/14
88. Investigation of turbulent flow on tube bundle using Lattice Boltzmann method ، علي مريخي ، 2020/2/5
89. Optimization of effective parameters in the turning process by experimental investigation and simulation ، مجتبي استادمحمدي ، 2020/2/5
90. Design of drilling fixture and analysis of the forces acting on the workpiece by computer ، آمنه اسكندري شهركي ، 2020/2/5
91. Experimental Investigation of Electro-Plastic Effect in Deep Drawing Process of Square Parts ، مهدي خليلي ، 2020/1/28
92. Investigation on the feasibility of electro-pulsing assisted extrusion process and its effective parameters ، محمد منتظري گلوگاهي ، 2020/1/22
93. experimental study on the effect of CuO nanofluid in MQL milling of Aluminium alloy ، اميرحسين حسني ، 2019/12/10
94. Evaluation of burnishing process effects on wear characteristic of Ck45 steel ، ايمان سالارزاده خباز ، 2019/11/7
95. Numerical and experimental study of tube expansion by Electromagnetic forming ، جواد اسماعيلي ، 2019/9/11
96. Analysis and design of a serial cable actuated firefighting robot ، عباس داداشي اومالي ، 2019/9/11
97. Feasibility study and investigation of electro-hydraulic forming process using flexible pin matrix ، سعيد زواري ، 2019/9/7
98. Investigation of sandwich method to produce Al/SiC composite using friction stir processing ، معراج هوشيار ، 2019/9/7
99. Initial blank optimization in deep drawing process (Hydroforming with radial pressure) using ANN coupled with a meta heuristic algorithm ، مقداد غياث ، 2019/8/26
100. An Investigation on the mechanical and physical properties of ceramic parts printed with FDM (Fused Deposition Modeling) ، آرمان قلي زاده روشن ، 2019/2/5
101. use of AM-EDM in surface modification of the bone implant ، بهزاد اوغازي اله اباد ، 2019/2/5
102. Effect of aging treatment on the bending of aluminum tubes series 6000 ، محمدرضا كاظمي خرات كلايي ، 2019/2/4
103. void closure prediction behavior in extrusion using finite element analysis and neural network ، سيده زهرا قريشيان اميري ، 2019/2/3
104. Experimental study of surface properties of aluminum using monel 400 by electrical discharge method with ultrasonic vibrations ، هادي عيوضي باقري ، 2018/11/21
105. Numerical investigation of heat transfer enhancement in an enclosure by electrohydrodynamic technique and determination of optimum arrangement of electrodes in order to reduce power consumption ، محمدجواد حسن پورامام مقدم ، 2018/11/6
106. Possibility of producing composite bipolar plates with compression molding ، احيا كريمي ، 2018/9/16
107. studying the effective process parameters of warm sheet hydroforming assisted by radial pressure ، احسان خسروجردي ، 2018/2/28
108. The experimental and numerical investigation of performance and calibration of quarter-turn Scoth-yoke actiator orifice in break detection system of gas pipelines ، مهدي محمودي ، 2018/2/19
109. Improvement in formability of sheet hydroforming Process by Pressure loading paths optimization using a control strategy ، ميلاد صادق يزدي ، 2018/1/24
110. Exprimental Investigation Of Nanofluids Flow and Heat Transfer in Directـ Absorption Solar Energy Collectors ، طاهره گرجي بندپي ، 2016/12/21
111. `Intelligent control and optimization Of Pressure Path in sheet Hydrodynamic Hydroforming Process ، اميررضا يعقوبي اسپورزي ، 2016/9/5
112. Experimental Investigation of Effective Parameters on Fatigue Strength and Surface Roughness of Aluminum Alloy 7075 in External Roller Burnishing Process ، معين تقي زاده مقدم
113. Experimental study of Friction Stir Welding (FSW) of dissimilar polymers ، شهرام طالشي كلتي
114. Optimization of drilling parameters of glass fiber reinforced epoxy composite modified with graphene ، هادي جنگجو
115. Fabrication and Evaluation of Laminated Composite Grid Structures Using Vacuum Infusion Process (VIP) ، محمد فولادي
116. Investigating of cryogenically treated tool on electrical discharge wircut process performance ، محسن استادرحيمي
117. Investigation on EDM of Graphen reinforced CFRP composite ، ابراهيم محسني
118. Investigating of Specific Lapping Process Parameters Effect on Surface Integrity Of Inconel 718 Superally ، جعفر رضائي دشت ارژنه
119. Dynamic behavior analysis of oscillating beam with passive Vibro-Impact(VI) absorber ، سيدقاسم عنايتي
120. Numerical and experimental study of shell and tube heat exchanger with multi-lobed cross section tube bundle ، ليلا هندويي
121. Prediction of the process window with the help of neural network in hydromechanical deep drawing process of TWB stell sheets ، علي رضا قلي زاده پاشا
122. Investigation of Nano-Graphen Mixed dielectric Effects on EDM of Nimonic75 Superalloy and optimization of process parameters ، طالب ضاري وداعه الحسناوي
123. Fabrication and Evaluation of the Mechanical Properties of 3D-Printed Lattice Structures Reinforced with Glass Fibers and Polymer Foam-Filled Cores ، علي نيكجوسوخت ابنداني
124. Robotic Flatness Inspection using macro-Image Analysis of a Projected Laser Network on Rolled Metal Surfaces ، حازم محمد عباس عباس
125. Investigation of main design parameters in Radiators Using Innovative Nanocomposite Coatings ، غسان حمادي علي الحسن
126. Vibration and Temperature Analysis for Ultrasonic Bone Drilling with Coolant ، علي فائز حسن حسن
127. Integrated Design, Numerical Simulation, and Experimental Development of a Multifunctional Energy-Harvesting Flooring System Combining Photovoltaic, Piezoelectric, and Thermoelectric Technologies ، محمد خواجونددلسمي
128. Enhancing Robotic Arc Welding Quality Monitoring Through Advanced Vision-Based Techniques and Deep Learning Models ، مصطفي عبدالعزيز هادي الموسوي
129. Experimental evaluation of TiO?-SiO? nanoceramic coating for improving tribological properties of aluminum segments of rubber curing molds ، هادي پارسا
130. Experimental Investigation on Mechanical and Metallurgical Properties of Ultrasonic Friction Stir Welded Aluminum Alloys (A6060 to A5083) ، حميد صلال حاشوش البدري
131. Design and construction of a faulty ground mobile robot and implementation of navigation using sensor fusion and vision in an indoor environment ، محمد رازقندي
132. Optimization of 3D-Printed Wave Springs using TPU Design, Fabrication, and Fatigue Characterization. ، احمد ابراهيم رزوقي جميلي
133. Numerical and experimental study of the effect of vortex generator geometry on the thermal and hydraulic performance of a double pipe heat exchanger ، فريد صادق شش پلي
134. Numerical and experimental investigation of helical heat exchanger with multiple cross section ، حسين صفري كردي
135. Numerical and Experimental Investigation of the Effect of Lattice Structures on the Thermo-Hydraulic Performance of a Solar Air Heater ، سمير ترف عزيز العارضي
136. Investigation of shear strength in ultrasonic welding of 3D printed thermoplastics reinforced with short glass fiber by fused deposition modeling method ، زمن سعد راشد راشد
137. Investigation of process parameters effect on delamination, surface roughness, burr and force in drilling of graphene reinforced carbon fiber epoxy composite ، حيدر وثيج عجيل ال غشيم

Hamid Baseri

Associate Professor Hamid Baseri

Hamid Baseri

Subjects Taught

Executions And Scientific Activities

Papers in Conferences

Papers in Journals

Thesis